Skip to content

November 2026

Changes released in November 2026.

Open in the full timeline

Web appFixMajorCurtailment & grid limits

The inverter limit now uses the complete datasheet total

The inverter limit now uses the sum of a plant's complete inverter datasheets when no manual value is set. The limit shows on the plant's power graph, forecast strip, alert text and outage-loss export, and the on-site agent clips at it.

mirox 2.15.891 – 2.15.905
Web appFeatureMajorCurtailment & grid limits

The "Park control" tab shows grid and marketer power limits

On a solar plant's analysis page, the "Park control" tab now shows the grid operator's and the direct marketer's power limit per segment, in percent or watts, with a week or month line graph.

mirox 2.15.887
AgentFixMajorSolar equipment

Detected capacity no longer reads above the nameplate

A plant's detected capacity no longer reads above its nameplate when a group of shaded strings at half current makes healthy single strings count as parallel rows. For affected plants the detected capacity moves down toward the nameplate. Plants receive this with their next agent update.

mirox-agents 3.2.266
AgentFeatureMajorData collection

A plant controller can now be added as a data logger

A plant controller can now be added as a data logger, with the on-site agent reading the power, energy, operating state, string positions and fault codes of the plant's string inverters. Plants receive this with their next agent update.

mirox 2.15.875 – 2.15.881mirox-agents 3.2.258 – 3.2.264
AgentFixSolar equipment

The components page no longer marks a string as not connected

A string that produced no energy on one day but energy within the last 30 days is no longer marked as not connected. The not-connected mark now uses the same 30-day energy window as the "probably not connected" badge on the components page. Plants receive this with their next agent update.

mirox-agents 3.2.251 – 3.2.256
Web appImprovements and fixesAlerts & events

Condition events show how often the on-site agent raised them, and the plant monitor's "Service" tab folds a VPN or network outage into one row.

  • In a plant's "Events" list, a condition now shows how many times the on-site agent raised it.
  • A plant's VPN or its own network being offline now appears in the plant monitor's "Service" tab as one row for its data loggers.
  • In a plant's event dialog, the history distinguishes a recurrence closed by the on-site agent from a manual reopen.
  • In a plant's "Events" list, a failed surge protector or a fan, heater or cooling pump now raises a condition with its own label.
  • A device-fault event in a plant's "Events" list no longer keeps a stale raise count in its description after its reasoning changes.
mirox 2.15.815 – 2.15.822
Web appFeatureMajorSolar equipment

Transformer stations are now components of a solar plant

A solar plant's MV/LV transformer station is now a component. The plant's "Transformer stations" page shows each station's operating state, its condition, LV active power and oil temperature, with one curve per station. A "Transformers" tab on the components page and entries in events and tickets link to the station.

mirox 2.15.783 – 2.15.792
AgentFixMajorProduction & yield

The month-to-date yield no longer counts the previous day twice

A solar data logger's month-to-date yield previously counted the previous day's production again on the first day of a new month, inflating the lifetime energy sum. The repeated production is no longer published, and figures already issued keep their value. Plants receive this with their next agent update.

mirox-agents 3.2.244 – 3.2.246
AgentImprovements and fixesAlerts & events

False offline and unreachable alerts, false fault events and false data holds no longer fire on loggers, inverters and battery historians. An inverter fault that re-raises after its first raise now opens its fault event again.

  • A plant no longer reads offline after a brief network link drop.
  • A data logger's month-to-date yield no longer opens a false mismatch on a late step.
  • A data logger is no longer alerted unreachable while the plant's network link is pending.
  • A data logger outage is now reported once per episode.
  • A battery historian's cell voltages are no longer withheld as "not fed".
mirox-agents 3.2.244 – 3.2.246
AgentImprovements and fixesAlerts & events

In a plant's event list, DC measurement-defect, tracker and battery events no longer repeat. In an export, frozen lifetime-energy totals are not shown.

  • In a plant's event list, DC measurement-defect descriptions now name the faulty DC reading.
  • In a plant's event list, tracker silence and fault-stop events no longer repeat at night.
  • In a plant's event list, a battery unit at rest no longer posts a state change every night.
  • A data logger whose device list could not be read no longer reports its inverters as missing.
  • In an export, a lifetime-energy total frozen at its maximum value is no longer shown.
mirox-agents 3.2.235 – 3.2.238mirox 2.15.778 – 2.15.779