Skip to content

January 2026

Changes released in January 2026.

Open in the full timeline

Web appFixMajorProduction & yield

Inverter availability no longer misreads days without sun

Days without enough sunlight no longer leave a gap in the inverter availability figure in the technical report and the data export. Such a day now counts as fully available, and only stretches with enough sunlight and no output from the inverter bring the figure down.

mirox 2.0.37 – 2.0.41
Web appImprovements and fixesProduction & yield

Negative days no longer distort the dashboard's energy bars, and a data logger's login details can be edited from the components page.

  • A day that works out negative now shows as 0 in the dashboard's energy bars, with the amount carried over against the following day.
  • A data logger's login details can now be changed in its details on the components page.
  • Through the API, adding a ticket comment longer than 10,000 characters is now rejected with a validation message instead of failing with an unexpected error.
mirox 2.0.27
Web appImprovements and fixesSolar equipment

The analysis tables can now show a "String Count" column, and "Energy Reference" is filled in again when the energy columns are hidden. The greyed-out "Report" entry no longer appears in a plant's menu.

  • The analysis page's inverter and combiner box tables can now show a "String Count" column, with "Orientation" also among the selectable columns.
  • "Energy Reference" in the analysis tables is filled in again when the energy columns are hidden.
  • The greyed-out "Report" entry no longer appears in a plant's menu.
  • The component KPI figures in the API are now given in watt-hours and unrounded, in place of the kilowatt-hour figures.
  • Tickets can now be created for a plant through the API, with a category, a status, an assignee, linked events and components, and threaded comments.
mirox 2.0.15
Web appImprovements and fixesSolar equipment

A plant's component counts and total inverter power are complete again. The analysis tables now let their columns be chosen, and the components page marks components that have gone a year without data.

  • On the analysis page, "Select Columns" chooses which columns the inverter, combiner box and string tables show.
  • The components page now marks any inverter, combiner box or string that has sent no data for 1 year.
  • A plant's component counts and inverter power are complete again, after components that were never hidden had been left out.
  • The "Report" entry in a plant's menu is greyed out and cannot be opened.
mirox 2.0.1 – 2.0.3
Web appImprovements and fixesSolar equipment

A hidden inverter, combiner box or string now stays out of plant totals and reports.

  • A hidden inverter, combiner box or string, and everything below it, drops out of plant totals, inverter power and reports.
  • In an inverter's details, "Clear name" drops the name so it is picked up automatically again, which can take 30 minutes.
  • How much of the daylight hours a device reported now counts only readings above 0 W; 0 W in daylight counts as not reporting.
  • The components page now flags an inverter after 1 hour without data, and a combiner box or string after 25 hours instead of 2 days.
  • Tables offer 10, 20, 50 or 100 rows per page, and the chosen size applies to every table.
mirox 1.22.71 – 1.22.74
AgentFixData collection

Sungrow data loggers no longer mix up inverter values

On plants with a Sungrow data logger, an inverter's detailed readings and string values now belong to that inverter. Before, they could come from a different inverter or be missing altogether. Plants receive this with their next agent update.

mirox-agents 1.4.45mirox 1.22.70
Web appImprovements and fixesProduction & yield

The analysis tables now show, for each component, how much energy was lost and how efficiently it ran.

  • "Energy Loss" and "Efficiency" now appear for each inverter, combiner box and string, with efficiency averaged over at least 30 days.
  • The "Digital Twin" column is now called "Energy reference" and shows measured energy as a share of simulated energy, which can exceed 100%.
  • Inverters marked as hidden no longer appear in the analysis page's inverter table.
mirox 1.22.70
Web appImprovements and fixesSolar equipment

The production page now shows, for each inverter, how much of the daylight hours it actually reported.

  • In the production page's inverter table, a ring shows what share of the daylight hours each inverter reported over the selected period.
  • The monitor and the production page's inverter table treat an inverter as still in contact if it sent data within the last hour.
  • An inverter can be hidden from its details, and hidden ones shown again from the components page's inverter and combiner box lists.
  • The components page's inverter and combiner box lists now flag anything that has sent no data for more than 2 days.
  • The production page shows, per inverter, the data logger it reports through and that logger's status.
  • An info icon beside the status column on the dashboard and the monitor explains what each production status means.
mirox 1.22.65 – 1.22.66
Web appImprovements and fixesSolar equipment

Lists and details for plant components open again when one of their values cannot be calculated. Inverters also count as communicating for 48 hours after their last data.

  • Lists and details for inverters, combiner boxes, strings, feed-in meters and irradiation sensors open again when one of a component's values cannot be calculated.
  • The monitor and the inverter table on the production page now show an inverter as communicating if it sent data within the last 48 hours.
mirox 1.22.60 – 1.22.62
Web appImprovements and fixesData collection

Production and analysis graphs now mark the periods when snow lay on the ground. The monitor and the production page now show which devices are still reporting and when each was last seen.

  • Periods with snow on the ground are now shaded in the production and analysis graphs and named on hover.
  • In the monitor, an info button beside a plant's connection status opens a list of its data loggers and how each one is doing.
  • An inverter that has sent data in the last 2 hours now shows as reporting in the monitor.
  • The inverter table on the production page now shows, for each inverter, whether it is reporting and how long ago it was last seen.
  • A plant that is offline, has no data, or is producing above expectation is now shown as such, instead of all three looking inactive.
mirox 1.22.59
Web appImprovements and fixesProduction & yield

Each inverter, combiner box and string now shows how many days it produced normally, produced less than expected, produced nothing, or sent no data. The analysis tables now show which way each of them faces.

  • The analysis tables now show which way each inverter, combiner box and string faces, and can be sorted and filtered by it.
  • An inverter, combiner box or string now shows how many days it produced normally, produced less than expected, produced nothing, or sent no data.
  • In the production page's month view, a coloured dot above the bar marks each day that did not run normally, as explained in the legend.
mirox 1.22.56 – 1.22.58