Skip to content

July 2026

Changes released in July 2026.

Open in the full timeline

Web appFeatureData collection

A Huawei SmartLogger can now be added without storing its login

A Huawei SmartLogger can now be added without storing its login, since most readings come in over Modbus TCP rather than the web interface. A check then reports whether Modbus worked, is switched off or not permitted, or whether RS485 address conflicts hide inverters, naming the serial numbers it could not reach.

mirox 2.15.111 – 2.15.125
Web appImprovements and fixesData collection

A data logger's own web interface and its stored login now open straight from a plant's logger list.

  • A plant's data logger list now has a "Proxy" column that opens the logger's own web interface from its row.
  • In the stored-login dialog, the user name or the password can now be copied with one click.
  • On a plant with more than 100 network devices, a device's proxy link opens the device's own interface again instead of a wrong address.
  • After two-factor authentication is switched on, the proxy links in the network device and data logger tables appear at once, without a page reload.
mirox 2.15.111 – 2.15.125
AgentImprovements and fixesData collection

A Phoenix Contact controller now delivers a plant's feed-in readings. Expected production and the satellite performance ratio no longer read too low on days with a gap in the satellite reading.

  • A plant no longer appears offline while it catches up on a large backlog of older values.
  • With "Also monitor grid connection point" switched on, a Phoenix Contact controller now delivers the plant's feed-in power, reactive power and energy totals.
mirox-agents 3.1.184 – 3.1.197
Web appImprovements and fixesData collection

Data logger setup now shows which of the devices found still need a login.

  • A device that still needs a login is now marked "Password missing", and the key icon stores that login without a test read.
  • When a logger is not detected or its test read keeps failing, "Request logger support" sends a support request with its details filled in.
  • A plant's setup progress now has a fifth step, "Park data": peak power, inverter limit, coordinates and the twelve monthly performance-ratio targets.
  • When a direct VPN is added, "Mirox as Server" and "Mirox as Client" now explain their advantages and which one is recommended.
  • A component that produced earlier and then stopped no longer appears under "Probably not connected", nor does one on a plant commissioned hours ago.
mirox 2.15.89 – 2.15.96
Web appFeatureData collection

A Meteocontrol blue'Log data logger can now be added to a plant

A Meteocontrol blue'Log data logger can now be added to a plant, signed in with the password used on the device. Its devices and channels appear by name, and standard sensor channels come already recognised, needing only "Track this value".

mirox 2.15.80 – 2.15.88
AgentImprovements and fixesData collection

Values that plants were dropping now come through: on the largest plants, around sparse irradiation readings, and from Phoenix Contact controllers.

  • Plants with thousands of strings no longer stop delivering their string and combiner box values.
  • On plants that report sparsely, the figures worked out from irradiation readings no longer have gaps.
  • Plants with a Phoenix Contact controller now report their grid-operator and direct-marketer power limits, whichever integrator built the control cabinet.
  • An inverter whose peak power is entered as one figure is read again instead of being skipped.
mirox 2.15.80 – 2.15.88mirox-agents 3.1.151 – 3.1.153
AgentFixMajorData collection

Huawei SmartLogger now reports every string of its inverters

Larger SUN2000 inverters on a Huawei SmartLogger reported only their first 12 or 18 strings, leaving the rest without voltage or current. Every wired string is now monitored, whatever the model. Plants receive this with their next agent update.

mirox-agents 3.1.122