Skip to content

August 2026

Changes released in August 2026.

Open in the full timeline

AgentFeatureMajorData collection

Huawei battery storage is now read down to its cells

A Huawei SmartLogger with a LUNA2000 battery behind it now reports the whole storage: its converters, the container, its racks, packs and cells, with power, charge and discharge limits, state of charge and cell state of health. Plants receive this with their next agent update.

mirox-agents 3.1.416 – 3.1.417mirox 2.15.361 – 2.15.366
AgentFeatureAlerts & events

Battery alarms now appear in a plant's event list

Alarms that NR Electric converters and Linyang battery containers raise about themselves now appear in the plant's event list, and an alarm closes again as soon as the device clears it. Each alarm shows how serious it is, and a Linyang alarm names the racks affected. Plants receive this with their next agent update.

mirox-agents 3.1.416 – 3.1.417mirox 2.15.361 – 2.15.366
AgentFeatureMajorData collection

Phoenix Contact AXL controllers can now be added as data loggers

A Phoenix Contact AXL controller can now be added as a data logger, reading every combiner box and string, the grid meter with its lifetime feed-in reading, and the irradiation and temperature sensors every 60 seconds. Plants receive this with their next agent update.

mirox 2.15.340 – 2.15.352mirox-agents 3.1.403 – 3.1.412
Read more in the documentationData loggers
AgentFeatureData collection

An Elsist DLMS concentrator can now be added as a data logger

An Elsist SlimLine DLMS concentrator can now be added as a data logger, reading a Landis+Gyr feed-in meter through it: grid power plus the lifetime feed-in and consumption counters, at the meter's own resolution. Plants receive this with their next agent update.

mirox 2.15.340 – 2.15.352mirox-agents 3.1.403 – 3.1.412
Read more in the documentationData loggers
AgentFeatureMajorBattery storage

A FREQCON BESS FQ battery storage system can now be added as a logger

A FREQCON BESS FQ battery storage system can now be added to a plant as a data logger, and each cabinet's state of charge, DC power, charge and discharge energy, and cell voltages and temperatures are then read. Plants receive this with their next agent update.

mirox-agents 3.1.298 – 3.1.304mirox 2.15.214 – 2.15.224
Read more in the documentationData loggers
AgentFeatureMajorData collection

A Solar-Log data logger can now be added with only its address

A Solar-Log data logger can now be added like any other, with only its address and, where the logger has one, its user password, after which every inverter, meter and sensor it lists is read, whatever its make.

mirox 2.15.190 – 2.15.197mirox-agents 3.1.259 – 3.1.276
Read more in the documentationData loggers
AgentFeatureMajorData collection

A new data logger now fills in the history it still holds

When a Solar-Log data logger or a Janitza meter is added, the devices behind it that are new to Mirox bring in the readings they still hold, up to two years back. This happens once, in the background, and plants receive it with their next agent update.

mirox 2.15.190 – 2.15.197mirox-agents 3.1.259 – 3.1.276
Read more in the documentationData loggers
AgentFeatureMajorCurtailment & grid limits

A Zebotec park controller now shows its power limits

A Zebotec PVPC park controller now shows the plant's active-power setpoints — the limit from the grid operator, the limit from the direct marketer, and the one the controller is acting on — each in percent of the plant's nameplate power. Plants receive this with their next agent update.

mirox-agents 3.1.250 – 3.1.256
AgentFeatureMajorCurtailment & grid limits

A Wattkraft Parkcontrol park controller now needs only its address

A Wattkraft Parkcontrol park controller is now read from its address alone, without a login, delivering the active-power setpoints of the grid operator and the direct marketer, which of them is in force, and whether the link to the direct marketer is up.

mirox-agents 3.1.243
AgentFeatureAlerts & events

An irradiation sensor that stops measuring is now reported

An irradiation sensor is now flagged when it reads zero while a neighbouring sensor or the plant's own production shows the sun is up. A confirmed defect also sends a notification.

mirox-agents 3.1.227 – 3.1.232mirox 2.15.166 – 2.15.172
AgentFeatureMajorData collection

An SMA Sunny Central plant now comes in from one address

An SMA Sunny Central plant can now be added with "SMA Sunny Central" as the data logger and the address of its SC-COM gateway, behind which its inverter, the string monitor control and every string monitor are found. Plants receive this with their next agent update.

mirox 2.15.160 – 2.15.165mirox-agents 3.1.220 – 3.1.226
AgentFeatureCurtailment & grid limits

Direct-marketer curtailments now get a "Marketer settlement" event

For each curtailment measure by the direct marketer, the lost energy is now recorded as a "Marketer settlement" event on the plant's "Activity" page, beside the "Redispatch settlement" events of grid-operator curtailments. The measure's own day can serve as its reference day, since only grid-operator curtailments disqualify a day. Plants receive this with their next agent update.

mirox 2.15.126 – 2.15.129
Read more in the documentationMarket