Skip to content

Changelog

Every change to Mirox, grouped by month. Filter by group or by kind of change.

Clear filters

November 20261

Web appImprovements and fixesAlerts & events

Condition events show how often the on-site agent raised them, and the plant monitor's "Service" tab folds a VPN or network outage into one row.

  • In a plant's "Events" list, a condition now shows how many times the on-site agent raised it.
  • A plant's VPN or its own network being offline now appears in the plant monitor's "Service" tab as one row for its data loggers.
  • In a plant's event dialog, the history distinguishes a recurrence closed by the on-site agent from a manual reopen.
  • In a plant's "Events" list, a failed surge protector or a fan, heater or cooling pump now raises a condition with its own label.
  • A device-fault event in a plant's "Events" list no longer keeps a stale raise count in its description after its reasoning changes.
mirox 2.15.815 – 2.15.822

October 20263

Web appImprovements and fixesAlerts & events

Outage notices for a shared plant now reach every cooperation partner through its own marketer connection. Outage alert e-mails are no longer sent blank.

  • The assistant in the "Alarm Manager" rule editor now covers receivers, templates, the outage report and the direct marketer.
  • The "Alarm Manager" template builder previews the e-mail as it will be sent.
  • The stored-login shield no longer shows for a user name without a password on the networking devices table.
  • On a mobile-width page, assistant chat transcripts are reachable again under the auto-hiding navbar.
mirox 2.15.622 – 2.15.626
Web appImprovements and fixesAlerts & events

The "Alarm Manager" no longer offers an acknowledge action; alerts open and close by the plant's state alone.

  • The "Alarm Manager" alert's detail page now shows who was notified.
  • Plant sum and per-inverter rules no longer fail to save in the "Alarm Manager" when the outage report is off.
  • The support composer takes a pasted screenshot as an inline image.
  • The support ticket list shows the plant in a sortable column.
  • The notification bell's list no longer leaves the page frozen when an alert in it is opened.
mirox 2.15.620 – 2.15.621

September 20264

Web appFixAlerts & events

An inverter fault now opens its outage under curtailment

An inverter that reports a fault no longer opens its outage only after a curtailment cap or low light has lifted. The event dialog shows which condition it overrode, with the maker's status and text.

mirox 2.15.553 – 2.15.564
Web appImprovements and fixesAlerts & events

A brief network glitch at a plant no longer reads as an internal problem. Battery racks, modules and cells list in position order, and the battery power graph marks AC and DC readings.

  • The plant connection view now reads "Agent restarting or reconnecting" for five minutes before it calls the problem "Internal service issue".
  • A device that went down during an outage on that path reads "Reconnecting" for three minutes after the connection returns.
  • The details panel on that view no longer closes when a date range is picked.
  • Battery racks, modules and cells now list in position order, instead of Cell 1, Cell 10, Cell 100.
  • The battery power graph now marks a reading "AC · converters" or "DC · racks", and containers and racks measure DC only.
mirox 2.15.397 – 2.15.406

August 20266

Web appImprovements and fixesAlerts & events

A component's status now shows what was detected and since when. Alarm codes from inverters now read in the user's own language.

  • A component's status on the analysis or components page now opens what was detected, since when, and how often each code was raised.
  • A feed-in meter now shows "Energy partly estimated" and an inverter with a frozen lifetime counter "Counter frozen", each opening the event behind it.
  • When strings are added, "Select all" now covers every inverter of the plant and no longer stops at the first 100.
  • A Huawei battery container no longer shows a warning for low coolant, nor a status number that appears in no Huawei document.
  • Creating a remote-access server for both IPv4 and IPv6 on a plant that already has remote access works again.
  • A file dragged into an assistant conversation is attached, and an image in a ticket opens full size when clicked.
mirox 2.15.376 – 2.15.393
Read more in the documentationEventsInverter status codesDirect VPN
Web appImprovements and fixesAlerts & events

The assistant can now say what an event cost in lost energy.

  • Asked about an event, the assistant estimates the lost energy and names the components and tickets linked to it.
  • The activity list now opens on events of high priority and above, and can still be filtered to any priority level.
  • Notification rules can no longer be set to the two lowest priority levels, and a rule already set to one keeps it.
mirox 2.15.225 – 2.15.227
Web appImprovements and fixesAlerts & events

Open events and connection outages are now counted without double counting, and every event carries a name in the user's language.

  • A plant's open-event count no longer adds the grouping alert on top of the dead components themselves: twelve dead inverters read as twelve.
  • Every event in a plant's activity list, dialogs and tickets now shows its name in the user's language instead of an untranslated one.
  • The month chart no longer marks a day as a connection outage when the plant produced right through a brief drop, or before monitoring began.
  • A Solar-Log logger can now be stopped, under its settings, from reporting a feed-in meter another source already reads, which counted grid power twice.
  • In the API, the site list can be narrowed by portfolio and type, both comma-separated, with the total and the paging following the filter.
mirox 2.15.214 – 2.15.224
Read more in the documentationData loggers
Web appImprovements and fixesAlerts & events

The monitor list no longer counts an inverter idle at night as missing.

  • "Reachable subnets" now shows where two plants' networks overlap, not only where they are identical, and lets the plant serving the shared addresses be chosen.
  • On a per-Wp day graph, the reference curve now follows the selected components, so an east-west plant shows both of its peaks.
  • The sign-in page now states how long the pause after repeated failed sign-ins lasts, and that changing the password does not end it early.
  • Third-party components received security updates.
mirox 2.15.198 – 2.15.213
Read more in the documentationAccount lockoutVPN
Web appImprovements and fixesAlerts & events

A data logger that has gone silent no longer counts as healthy in a plant's tally.

  • Graph tooltips now mark each curve with the events running at that moment, and a click pins the tooltip so those events can be opened.
  • Where a plant already has a Mirox-hosted remote access server, another router or network can now be added to it instead of a second server.
  • A plant's coordinates can now be entered as degrees, minutes and seconds or as decimal minutes, chosen under "Coordinate format".
  • Each connected site in a plant's remote-access list now opens its own "Live status", and its tunnel address can be copied with one click.
  • The edit dialog of a network device no longer shows the values of the device edited before it.
  • A plant can now be given a build date in the future when it is created.
mirox 2.15.190 – 2.15.197
Read more in the documentationDirect VPN
Web appImprovements and fixesAlerts & events

Open events now appear on the components list, on the components they concern.

  • The components list marks each inverter, combiner box and string with its open events, and selecting a mark opens that event.
  • A combiner box shows how many of its strings send no measurement data, and lists them when the number is selected.
  • A plant's string and inverter lists open again instead of failing with an error.
  • Opening a device's own web page through remote access no longer returns to the Mirox sign-in page.
  • A partner organization given a technical role can now edit a plant's network devices and add or remove devices.
  • IP addresses now sort by number in device lists and access logs, so .2 comes before .101.
mirox 2.15.185 – 2.15.189

July 20267

January 20263