Skip to content

Changelog

Every change to Mirox, grouped by month. Filter by group or by kind of change.

Clear filters

October 20262

Web appFixMajorProduction & yield

Energy figures no longer count a wrong reading as new energy

A reading that briefly showed an energy counter at zero or a nonsense high value previously re-added the counter's total as new energy. Energy figures in graphs, reports, exports and the battery dashboard now cancel that reading against the next one, so the affected figures fall to what the plant actually produced.

mirox 2.15.587 – 2.15.592

September 20262

Web appFixMajorProduction & yield

Wind plants' daily energy no longer jumps by impossible amounts

Days that read tens of GWh too high or too low, after a turbine's history was read in again or after a turbine fell silent, now show what the turbines actually produced. The corrected figures appear in the day, week, month and year views and on the day power curve.

mirox 2.15.468 – 2.15.483

August 20265

Web appFixMajorProduction & yield

A feed-in meter's own reading is used again on bright days

A feed-in meter's own reading is used again on bright days, and the day counts as "measured" instead of "integrated". Before, a high reading was thrown out as impossible and replaced by the total added up from the inverters, or by zero where there was no substitute.

mirox 2.15.214 – 2.15.224
Web appFixMajorProduction & yield

Expected yield now allows for panel ageing since the plant was built

A plant's expected monthly yield now allows for panel ageing counted from the day the plant was built, not from the day Mirox started collecting its data. Expected figures fall where the plant is older than its data, and no ageing is applied where no build date is recorded.

mirox 2.15.176 – 2.15.184
Web appFixMajorProduction & yield

Component details no longer show energy a thousand times too high

An inverter, a string or a combiner box opened from the analysis page showed its produced, expected and lost energy a thousand times too high — kWh labelled as MWh — and the battery overview showed DC power the same way. Both read correctly again.

mirox 2.15.166 – 2.15.172
Web appImprovements and fixesProduction & yield

The monitor chart now shows what a plant should have produced while it was offline. The week, month and year charts gain the same expected-production curve as the day chart.

  • The monitor chart now shows what a plant should have produced while it sent nothing, marked "Expected (no connection)".
  • Reference curves now break where the plant sent nothing, instead of drawing a straight line across the gap.
  • On the export page, "Try it out" now provides ready-made terminal commands, a Python script and an AI prompt, with a reporting-only access token.
  • A plant's components can now be searched and attached to a ticket while it is still being written.
  • Large exports covering many plants now arrive faster.
  • Every date range picker now offers "Last year", meaning the whole of the previous calendar year.
mirox 2.15.144 – 2.15.151
Read more in the documentationMetrics export APIRaw data excel exportAPI tokens

July 20261

Web appFixMajorProduction & yield

A day's lost energy now matches the week and month

On a plant's production page, the lost energy shown for a single day was too high and did not match the week and month bars. The day now uses the same measured value as those bars, and the figure falls to the one the longer periods already showed.

mirox 2.14.169 – 2.14.173

June 20264

Web appImprovements and fixesProduction & yield

Two more values can now be recorded in a plant's settings.

  • A plant's "Grid Transmission Limit" can now be entered in its settings, and its "Yearly Degradation" in percent beside the monthly PR targets.
  • A data logger now opens on a "Mapped metrics" overview, where one click removes a mapped reading and the change is saved straight away.
mirox 2.14.142 – 2.14.143
Read more in the documentationData loggers
Web appFixMajorProduction & yield

Production now covers days the feed-in meter did not report

Days when the feed-in meter did not report, or reported an implausible value, no longer drop out of production figures. Production for those days is taken from the inverters instead.

mirox 2.14.137 – 2.14.141
Web appImprovements and fixesProduction & yield

A plant's production page is rebuilt around the performance ratio. Remote access now reaches several connected sites at once.

  • Several connected sites can now be reached through one plant's remote access, with each site's subnets, keys and status managed on the "Peers" tab.
  • The production page is rebuilt: performance ratio per source, an inverter table, site specifications, and a day curve with the clear-sky ceiling and expected production.
  • Stretches where the plant could not be reached are now filled with the energy the weather model expects, shown as "Expected (no connection)".
  • The API now returns a plant's revenue and EEG compensation per month or year through GET /v1/park/{uid}/revenue, with Marktwert, Marktprämie and curtailment per settlement method.
  • The dashboard button again opens on the whole selected day, instead of on an empty range.
  • A plant's address is saved again when it is changed in the plant's details.
mirox 2.14.68 – 2.14.70
Read more in the documentationVPNRemote access

April 20262

March 20261

January 20267