Skip to content

June 2026

Changes released in June 2026.

Open in the full timeline

AgentFixMajorProduction & yield

Expected production no longer exceeds the grid transmission limit

Expected production, and the maximum under a clear sky, no longer rise above a plant's "Grid Transmission Limit". A grid operator's percentage setpoint now counts against that limit, not the inverters' combined peak. Plants receive this with their next agent update.

mirox-agents 3.1.112
AgentFixMajorSolar equipment

Strings now keep a confirmed orientation after two clear days

On plants where clear days are often curtailed, most strings used to end with only a partial result. Two clear days that agree are now enough for a confirmed orientation, instead of three. Plants receive this with their next agent update.

mirox-agents 3.1.112
AgentFixMajorSolar equipment

Strings get a result on days the inverters ran under a limit

Strings now get a result on days when the inverters ran under a power limit. Before, any limit below 100 percent made the check discard the whole day, so those days gave no result. Plants receive this with their next agent update.

mirox-agents 3.1.108 – 3.1.110
AgentImprovements and fixesSolar equipment

The on-site analysis now keeps the result of every string, even on a large plant.

  • After an on-site analysis on a large plant, every string keeps its result, where a few hundred of them previously went missing.
  • Changes to a plant's components take effect in the on-site analysis started right after, instead of up to an hour later.
  • Becker PV-Control data loggers can now be read by mapping the values they send.
mirox 2.14.144 – 2.14.147mirox-agents 3.1.108 – 3.1.110
Read more in the documentationComponentsData loggers
AgentFixMajorCurtailment & grid limits

Marketer curtailment no longer counts during negative spot prices

In Germany, curtailment by the direct marketer no longer counts during hours with a negative day-ahead price. Curtailment energy and the compensation calculated from it for those hours decrease. Plants receive this with their next agent update.

mirox-agents 3.1.97 – 3.1.98
AgentFixProduction & yield

Feed-in power now counts every meter behind one QReader data logger

Where all grid meters are read through one QReader data logger, feed-in power behind curtailment losses and the performance ratio now sums every reporting meter instead of keeping only one. Curtailment losses decrease and the performance ratio rises, while figures already issued keep their value until a period is rebuilt. Plants receive this with their next agent update.

mirox-agents 3.1.97 – 3.1.98
AgentFixMajorCurtailment & grid limits

Flat-rate curtailment no longer counts the night hours

Curtailment energy under the flat-rate (pauschal) settlement method was too high because the night hours counted as well. It now covers only the energy lost while the sun was up, so those figures and the compensation based on them go down. Plants receive this with their next agent update.

mirox-agents 3.1.73
AgentFixProduction & yield

Forecasts now follow each string's actual orientation and tilt

Expected production and the five-day forecast now follow the direction and tilt each string actually has. Before, every string was assumed to face south at 15°, so plants built any other way saw figures that were off. Plants receive this with their next agent update.

mirox 2.14.71 – 2.14.74
Read more in the documentationComponents
AgentImprovements and fixesProduction & yield

Orientation and tilt are now detected on plants that only measure at the inverter. Expected energy no longer jumps between the days of the five-day forecast.

  • Orientation and tilt are now detected on plants that only measure at the inverter, from the inverter's power for its strings.
  • Expected energy no longer jumps between forecast days, as the five-day forecast keeps one performance ratio across all of them.
mirox-agents 3.1.67
Read more in the documentationComponents
AgentFixMajorProduction & yield

Performance ratio steadies on plants with several feed-in meters

The performance ratio of a plant that measures feed-in energy with more than one meter no longer jumps between implausible values. It now adds up all those meters, including on plants that report combined inverter power as the feed-in measurement. Plants receive this with their next agent update.

mirox-agents 3.1.61 – 3.1.65
AgentImprovements and fixesData collection

A Huawei data logger that could not be reached at first now finds its inverters on its own. A device that refuses extra connection details opens its web interface.

  • A Huawei data logger that cannot be reached when the on-site agent starts shows its inverters within five minutes, without a restart.
  • The web interface of a device that refuses extra connection details can now be opened.
mirox-agents 3.1.61 – 3.1.65
Read more in the documentationData loggersProxy
AgentFixMajorProduction & yield

Curtailment and performance ratio now sum every grid meter

At a plant with more than one grid meter, the feed-in power behind curtailment losses and the performance ratio was previously neither the sum nor the average of the meters. It is now the sum of every meter reporting in that minute. Plants receive this with their next agent update.

mirox 2.14.38 – 2.14.48mirox-agents 3.1.43 – 3.1.55
AgentImprovements and fixesProduction & yield

The clear-sky curve is complete again. A device's web interface opens on its own start page again.

  • The clear-sky curve no longer breaks off between yesterday midday and midnight.
  • A device's web interface opens on its own start page again, not on a link that no longer works.
  • A plant's operating state is right again straight after the on-site agent restarts, instead of staying unknown until it next changes.
  • The data logger a combiner box or string is read from is now shown, as it already was for inverters.
  • The manufacturer of a device found by a network scan is now filled in from its hardware address.
  • Expected energy from the irradiation sensor and from satellite data is now also kept as a live running total, next to the live expected power.
mirox 2.14.38 – 2.14.48mirox-agents 3.1.43 – 3.1.55