Skip to content

August 2026

Changes released in August 2026.

Open in the full timeline

AgentImprovements and fixesData collection

Production curves for each component now follow the day in 15-minute steps instead of filling in hour by hour. Curtailment figures now appear for plants that previously had none.

  • Curtailment figures now appear for plants without irradiation data and for five plants whose nameplate power could not be read.
  • An inverter now reports its active-power setpoint.
  • An outage on a dead inverter no longer closes and re-opens through the morning.
  • A component producing far below expectation no longer reads healthy after a stretch where it sent nothing.
  • Voltages from a data logger now read as phase-to-neutral under the new phase names.
mirox-agents 3.1.361 – 3.1.373
AgentImprovements and fixesData collection

A device's web page that answers only over HTTPS opens again. It is no longer noted as plain HTTP.

  • A device's web page that answers only over HTTPS is no longer noted as plain HTTP.
  • A device just found in a scan now opens its web page at once.
  • Curtailment episodes on a plant's "Activity" page show their current status again after the month's settlement has run.
mirox-agents 3.1.346 – 3.1.349mirox 2.15.274 – 2.15.278
Read more in the documentationNetwork devices
Web appImprovements and fixesData collection

Adding a Phoenix Contact or Huawei data logger works again, instead of being refused the moment it is saved. A device's web page opened through remote access no longer loops endlessly or arrives as a file download.

  • Adding a Phoenix Contact or Huawei data logger no longer fails the moment it is saved.
  • A device's web page opened through remote access no longer loops endlessly or arrives as a file download.
  • The assistant now says when web search or document reading is unavailable, instead of answering from memory.
  • The name "MCP Server Authentication" is reserved for the assistant's own token and is refused when an access token is created.
  • The "Battery storage present" switch in a plant's master data now shows in the user's language.
mirox 2.15.243 – 2.15.252
Read more in the documentationData loggersProxy
AgentImprovements and fixesData collection

A device a data logger lists but has never measured now appears among the plant's components. Where a Solar-Log logger's daily totals are unreadable, daily energy is recovered from the devices' own readings.

  • A Solar-Log feed-in meter now appears in the plant's components even while it is still holding back its energy readings.
  • The single alert for components that stopped producing now arrives after 30 minutes instead of an hour.
mirox-agents 3.1.298 – 3.1.304
Read more in the documentationComponents
Web appImprovements and fixesData collection

Each value read from a data logger can now be given its own factor and limits.

  • Under "Advanced settings", a factor and a high and low limit can be set for each value read from a data logger.
  • Inverters, combiner boxes and strings that have never sent a measurement are now counted separately, no longer as producing.
  • An inverter, combiner box, irradiation sensor or feed-in meter added by hand can now be deleted from its table, after a confirmation.
mirox 2.15.176 – 2.15.184
Read more in the documentationData loggers
AgentFixData collection

Unreachable Huawei inverters no longer report zero production

Huawei plants no longer show production dropping to zero when the data logger cannot reach an inverter. An unreachable inverter is now left out instead of being recorded as zero, and the plant's power is worked out from the inverters that did answer.

mirox-agents 3.1.233 – 3.1.237
AgentImprovements and fixesData collection

Combiner boxes, irradiation sensors and feed-in meters now name the data logger they are read from. An older device reached through remote access no longer asks for a login over and over.

  • Combiner boxes, irradiation sensors and feed-in meters now show the data logger they are read from.
  • An older device's own web page, reached through remote access, no longer asks for a login over and over.
  • Adding a data logger now reports when its test read keeps failing — a missing login, for example — instead of showing nothing.
mirox-agents 3.1.227 – 3.1.232mirox 2.15.166 – 2.15.172
AgentImprovements and fixesData collection

Grid meter readings taken through a Phoenix Contact controller no longer arrive with the feed-in direction reversed.

  • A Phoenix Contact controller now works out by itself which direction the grid meter counts, and shows no grid values until it is sure.
  • "Grid sign convention" in the controller's settings sets the direction by hand when the automatic check cannot decide.
  • Settlement events now also carry the lost energy worked out by the flat-rate (pauschal) method, beside the figures from each irradiation source.
  • Curtailments back to January 2025 are now settled, the reference day for months before July 2026 being the last suitable day before the curtailment.
  • A settlement event now names an irradiation source left out and why, and a morning gap in its readings no longer leaves the afternoon unsettled.
  • Expected production now follows each string's own orientation and size when the plant's components state them all, instead of one plant-wide orientation.
mirox-agents 3.1.203 – 3.1.207mirox 2.15.130 – 2.15.133
Read more in the documentationMarket