Skip to content

August 2026

Changes released in August 2026.

Open in the full timeline

AgentFixProduction & yield

The performance ratio now comes from the inverters' own output

Wherever every inverter a plant expects has reported, the performance ratio now comes from what those inverters produced, not from the feed-in meter. Losses in the meter and the lines no longer count against it. Plants receive this with their next agent update.

mirox 2.15.376 – 2.15.393mirox-agents 3.1.435 – 3.1.442
AgentFixProduction & yield

A failed grid meter no longer hides curtailed minutes

The performance ratio is no longer flattered at a plant whose grid meter cannot be reached. Minutes the plant spent held down at the grid operator's limit are now left out, even without a reading from that meter, instead of counting as clean production. Plants receive this with their next agent update.

mirox-agents 3.1.422 – 3.1.433
Web appFixMajorProduction & yield

A feed-in meter's own reading is used again on bright days

A feed-in meter's own reading is used again on bright days, and the day counts as "measured" instead of "integrated". Before, a high reading was thrown out as impossible and replaced by the total added up from the inverters, or by zero where there was no substitute.

mirox 2.15.214 – 2.15.224
AgentFixMajorProduction & yield

Expected production at capped plants no longer reads too low

The expected-production curve read too low at plants whose output is capped, sitting well below the cap on bright days. It now follows the cap itself, and expected production on a bright day matches what the plant is allowed to deliver. Plants receive this with their next agent update.

mirox-agents 3.1.278 – 3.1.296mirox 2.15.198 – 2.15.213
AgentImprovements and fixesProduction & yield

An inverter whose energy counter stalls no longer lowers a Fronius plant's energy, and editing a data logger no longer splits other loggers' inverter history.

  • At Fronius plants, an inverter whose lifetime energy total stops advancing no longer lowers the plant's energy, its production being worked out from its power.
  • Adding or editing a data logger no longer causes another logger's Huawei or Sungrow inverters to appear as new components with their history split.
mirox 2.15.190 – 2.15.197mirox-agents 3.1.259 – 3.1.276
Web appFixMajorProduction & yield

Expected yield now allows for panel ageing since the plant was built

A plant's expected monthly yield now allows for panel ageing counted from the day the plant was built, not from the day Mirox started collecting its data. Expected figures fall where the plant is older than its data, and no ageing is applied where no build date is recorded.

mirox 2.15.176 – 2.15.184
Web appFixMajorProduction & yield

Component details no longer show energy a thousand times too high

An inverter, a string or a combiner box opened from the analysis page showed its produced, expected and lost energy a thousand times too high — kWh labelled as MWh — and the battery overview showed DC power the same way. Both read correctly again.

mirox 2.15.166 – 2.15.172
AgentFixMajorProduction & yield

Curtailed minutes no longer count against the performance ratio

The performance ratio read too low at plants that were curtailed, and the expected production scaled from it was too low as well. Both are correct from this release, which plants receive with their next agent update. Plants receive this with their next agent update.

mirox-agents 3.1.214
Web appImprovements and fixesProduction & yield

The monitor chart now shows what a plant should have produced while it was offline. The week, month and year charts gain the same expected-production curve as the day chart.

  • The monitor chart now shows what a plant should have produced while it sent nothing, marked "Expected (no connection)".
  • Reference curves now break where the plant sent nothing, instead of drawing a straight line across the gap.
  • On the export page, "Try it out" now provides ready-made terminal commands, a Python script and an AI prompt, with a reporting-only access token.
  • A plant's components can now be searched and attached to a ticket while it is still being written.
  • Large exports covering many plants now arrive faster.
  • Every date range picker now offers "Last year", meaning the whole of the previous calendar year.
mirox 2.15.144 – 2.15.151
Read more in the documentationMetrics export APIRaw data excel exportAPI tokens