Skip to content

June 2026

Changes released in June 2026.

Open in the full timeline

AgentFixMajorProduction & yield

Expected production no longer exceeds the grid transmission limit

Expected production, and the maximum under a clear sky, no longer rise above a plant's "Grid Transmission Limit". A grid operator's percentage setpoint now counts against that limit, not the inverters' combined peak. Plants receive this with their next agent update.

mirox-agents 3.1.112
Web appImprovements and fixesProduction & yield

Two more values can now be recorded in a plant's settings.

  • A plant's "Grid Transmission Limit" can now be entered in its settings, and its "Yearly Degradation" in percent beside the monthly PR targets.
  • A data logger now opens on a "Mapped metrics" overview, where one click removes a mapped reading and the change is saved straight away.
mirox 2.14.142 – 2.14.143
Read more in the documentationData loggers
Web appFixMajorProduction & yield

Production now covers days the feed-in meter did not report

Days when the feed-in meter did not report, or reported an implausible value, no longer drop out of production figures. Production for those days is taken from the inverters instead.

mirox 2.14.137 – 2.14.141
AgentFixProduction & yield

Feed-in power now counts every meter behind one QReader data logger

Where all grid meters are read through one QReader data logger, feed-in power behind curtailment losses and the performance ratio now sums every reporting meter instead of keeping only one. Curtailment losses decrease and the performance ratio rises, while figures already issued keep their value until a period is rebuilt. Plants receive this with their next agent update.

mirox-agents 3.1.97 – 3.1.98
AgentFixProduction & yield

Forecasts now follow each string's actual orientation and tilt

Expected production and the five-day forecast now follow the direction and tilt each string actually has. Before, every string was assumed to face south at 15°, so plants built any other way saw figures that were off. Plants receive this with their next agent update.

mirox 2.14.71 – 2.14.74
Read more in the documentationComponents
Web appFeatureMajorProduction & yield

The "Forecast" page shows a five-day forecast for every plant

A "Forecast" page now lists a five-day production forecast for every visible plant, filtered by portfolio, searched by name and paged through as a list. Each day shows weather, temperature, wind and an energy figure, plus a power curve under the clear-sky ceiling.

mirox 2.14.68 – 2.14.70
Web appImprovements and fixesProduction & yield

A plant's production page is rebuilt around the performance ratio. Remote access now reaches several connected sites at once.

  • Several connected sites can now be reached through one plant's remote access, with each site's subnets, keys and status managed on the "Peers" tab.
  • The production page is rebuilt: performance ratio per source, an inverter table, site specifications, and a day curve with the clear-sky ceiling and expected production.
  • Stretches where the plant could not be reached are now filled with the energy the weather model expects, shown as "Expected (no connection)".
  • The API now returns a plant's revenue and EEG compensation per month or year through GET /v1/park/{uid}/revenue, with Marktwert, Marktprämie and curtailment per settlement method.
  • The dashboard button again opens on the whole selected day, instead of on an empty range.
  • A plant's address is saved again when it is changed in the plant's details.
mirox 2.14.68 – 2.14.70
Read more in the documentationVPNRemote access
AgentImprovements and fixesProduction & yield

Orientation and tilt are now detected on plants that only measure at the inverter. Expected energy no longer jumps between the days of the five-day forecast.

  • Orientation and tilt are now detected on plants that only measure at the inverter, from the inverter's power for its strings.
  • Expected energy no longer jumps between forecast days, as the five-day forecast keeps one performance ratio across all of them.
mirox-agents 3.1.67
Read more in the documentationComponents
AgentFixMajorProduction & yield

Performance ratio steadies on plants with several feed-in meters

The performance ratio of a plant that measures feed-in energy with more than one meter no longer jumps between implausible values. It now adds up all those meters, including on plants that report combined inverter power as the feed-in measurement. Plants receive this with their next agent update.

mirox-agents 3.1.61 – 3.1.65
AgentFixMajorProduction & yield

Curtailment and performance ratio now sum every grid meter

At a plant with more than one grid meter, the feed-in power behind curtailment losses and the performance ratio was previously neither the sum nor the average of the meters. It is now the sum of every meter reporting in that minute. Plants receive this with their next agent update.

mirox 2.14.38 – 2.14.48mirox-agents 3.1.43 – 3.1.55
AgentImprovements and fixesProduction & yield

The clear-sky curve is complete again. A device's web interface opens on its own start page again.

  • The clear-sky curve no longer breaks off between yesterday midday and midnight.
  • A device's web interface opens on its own start page again, not on a link that no longer works.
  • A plant's operating state is right again straight after the on-site agent restarts, instead of staying unknown until it next changes.
  • The data logger a combiner box or string is read from is now shown, as it already was for inverters.
  • The manufacturer of a device found by a network scan is now filled in from its hardware address.
  • Expected energy from the irradiation sensor and from satellite data is now also kept as a live running total, next to the live expected power.
mirox 2.14.38 – 2.14.48mirox-agents 3.1.43 – 3.1.55