January 2026
Changes released in January 2026.
Inverter availability no longer misreads days without sun
Days without enough sunlight no longer leave a gap in the inverter availability figure in the technical report and the data export. Such a day now counts as fully available, and only stretches with enough sunlight and no output from the inverter bring the figure down.
Data collection from a data logger can now be paused
Data collection from a data logger can now be paused for work on site. On a plant's components page, the data logger tab shows whether each logger is collecting right now and offers a "Pause" menu for 15 minutes up to 24 hours, with "Resume" ending the pause early.
The data export now has a "Language" option. Column headers and metric names come out in English or German.
A data logger can now be added on the components page
A data logger can now be added to a plant from the data logger tab of the components page, through "Add Logger". After choosing the logger type and entering its name, address, how often it collects data, credentials and the settings for that type, the new logger appears in the list while it starts up.
The power graph on the analysis page now starts with the "String Sum" line switched off. The line can be switched on in the graph's legend.
The dashboard now shows what production, shutdowns and losses are worth in euros as its main figure. A switch beside the time selection shows the energy figures instead.
Data collection from a data logger can now be paused
In the components page's "Data Logger" tab, "Pause" stops collection from a data logger for 15 minutes to 24 hours, and "Resume" ends the pause earlier. A paused logger shows as "Paused" with the time until it resumes on its own.
The on-site analysis can now be started for a chosen past day
On the components page, "Deep Analysis" starts a fresh run of the on-site analysis for a chosen past day, either as a "Full Analysis" of strings, combiner boxes, inverters and feed-in meters, or as "String Analysis Only". The button is available while the plant's on-site agent is reachable.
Negative days no longer distort the dashboard's energy bars, and a data logger's login details can be edited from the components page.
- A day that works out negative now shows as 0 in the dashboard's energy bars, with the amount carried over against the following day.
- A data logger's login details can now be changed in its details on the components page.
- Through the API, adding a ticket comment longer than 10,000 characters is now rejected with a validation message instead of failing with an unexpected error.
Opening a single ticket through the API no longer fails with an error.
The components page now lists a plant's data loggers
The components page of a plant now has a "Data Logger" tab listing every data logger at the plant, whether it is currently connected, and its address. Opening a logger shows where its data comes from, its serial number, its state and its connection settings.
The analysis tables can now show a "String Count" column, and "Energy Reference" is filled in again when the energy columns are hidden. The greyed-out "Report" entry no longer appears in a plant's menu.
- The analysis page's inverter and combiner box tables can now show a "String Count" column, with "Orientation" also among the selectable columns.
- "Energy Reference" in the analysis tables is filled in again when the energy columns are hidden.
- The greyed-out "Report" entry no longer appears in a plant's menu.
- The component KPI figures in the API are now given in watt-hours and unrounded, in place of the kilowatt-hour figures.
- Tickets can now be created for a plant through the API, with a category, a status, an assignee, linked events and components, and threaded comments.
The analysis page's graphs load faster, and plant events can carry a category and reference one another through the API.
- The analysis page loads faster: energy totals arrive separately, and the previous graph stays visible while a new period loads.
- Through the API, a plant event can now carry a category (environmental, maintenance, communication, defect, general, informative) and reference other events.
Report previews now show only the selected metrics
The preview table and bar chart on the report page now show only the metrics chosen with a metric selector. The preview no longer shows the other metrics.
Reports can be viewed by day, week or month
In a plant's report, the preview table and bar chart now show data at daily, weekly or monthly resolution. Yearly periods default to weekly resolution.
The daily energy bars on the analysis page no longer jump when an inverter, combiner box or string briefly reports zero. Days corrected this way carry a "Logger Problem" note.
- A day that came out negative on the analysis page now shows 0.
A plant's component counts and total inverter power are complete again. The analysis tables now let their columns be chosen, and the components page marks components that have gone a year without data.
- On the analysis page, "Select Columns" chooses which columns the inverter, combiner box and string tables show.
- The components page now marks any inverter, combiner box or string that has sent no data for 1 year.
- A plant's component counts and inverter power are complete again, after components that were never hidden had been left out.
- The "Report" entry in a plant's menu is greyed out and cannot be opened.
A hidden inverter, combiner box or string now stays out of plant totals and reports.
- A hidden inverter, combiner box or string, and everything below it, drops out of plant totals, inverter power and reports.
- In an inverter's details, "Clear name" drops the name so it is picked up automatically again, which can take 30 minutes.
- How much of the daylight hours a device reported now counts only readings above 0 W; 0 W in daylight counts as not reporting.
- The components page now flags an inverter after 1 hour without data, and a combiner box or string after 25 hours instead of 2 days.
- Tables offer 10, 20, 50 or 100 rows per page, and the chosen size applies to every table.
The analysis tables now show, for each component, how much energy was lost and how efficiently it ran.
- "Energy Loss" and "Efficiency" now appear for each inverter, combiner box and string, with efficiency averaged over at least 30 days.
- The "Digital Twin" column is now called "Energy reference" and shows measured energy as a share of simulated energy, which can exceed 100%.
- Inverters marked as hidden no longer appear in the analysis page's inverter table.
The production page now shows, for each inverter, how much of the daylight hours it actually reported.
- In the production page's inverter table, a ring shows what share of the daylight hours each inverter reported over the selected period.
- The monitor and the production page's inverter table treat an inverter as still in contact if it sent data within the last hour.
- An inverter can be hidden from its details, and hidden ones shown again from the components page's inverter and combiner box lists.
- The components page's inverter and combiner box lists now flag anything that has sent no data for more than 2 days.
- The production page shows, per inverter, the data logger it reports through and that logger's status.
- An info icon beside the status column on the dashboard and the monitor explains what each production status means.
Lists and details for plant components open again when one of their values cannot be calculated. Inverters also count as communicating for 48 hours after their last data.
- Lists and details for inverters, combiner boxes, strings, feed-in meters and irradiation sensors open again when one of a component's values cannot be calculated.
- The monitor and the inverter table on the production page now show an inverter as communicating if it sent data within the last 48 hours.
Production and analysis graphs now mark the periods when snow lay on the ground. The monitor and the production page now show which devices are still reporting and when each was last seen.
- Periods with snow on the ground are now shaded in the production and analysis graphs and named on hover.
- In the monitor, an info button beside a plant's connection status opens a list of its data loggers and how each one is doing.
- An inverter that has sent data in the last 2 hours now shows as reporting in the monitor.
- The inverter table on the production page now shows, for each inverter, whether it is reporting and how long ago it was last seen.
- A plant that is offline, has no data, or is producing above expectation is now shown as such, instead of all three looking inactive.
Each inverter, combiner box and string now shows how many days it produced normally, produced less than expected, produced nothing, or sent no data. The analysis tables now show which way each of them faces.
- The analysis tables now show which way each inverter, combiner box and string faces, and can be sorted and filtered by it.
- An inverter, combiner box or string now shows how many days it produced normally, produced less than expected, produced nothing, or sent no data.
- In the production page's month view, a coloured dot above the bar marks each day that did not run normally, as explained in the legend.