Skip to content

September 2026

Changes released in September 2026.

Open in the full timeline

Web appFeatureMajorReports, exports & files

The "Reports" page now shows data readiness before publishing

The "Reports" page now shows data readiness in four rows, monitoring, satellite, settled curtailment and official prices. Publishing a report lists non-final metrics with "Regenerate first" or "Publish anyway", and a recomputed settled month reads "Out of date".

mirox 2.15.581 – 2.15.586
AgentFeatureMajorData collection

A plant controller can now be added as a data logger

A plant controller can now be added as a data logger, reading the grid operator's active-power setpoint as a percentage of installed capacity or the plant's irradiance sensor. Plants receive this with their next agent update.

mirox-agents 3.2.120 – 3.2.123mirox 2.15.570 – 2.15.571
Web appFeatureMajorUsers & access

Files and folders can now be shared outside the organization

A file or folder from a plant or an organization can now be sent to someone outside it, who opens it with a link plus a 6-digit code or a set password, within chosen expiry, visit and download limits. A "Shares" tab now lists every share and what each visitor did.

mirox 2.15.504 – 2.15.512
Web appFeatureMajorNetwork & remote access

Remote access can now be handed to a technician without an account

Remote access to a plant can now be handed to an external technician as a link with its own password, without an account. The page behind the link provides the connection file, shows whether the connection is live, and lets the technician read the server's settings and log and test their own side.

mirox 2.15.504 – 2.15.512
Read more in the documentationDirect VPN
Web appFeatureMajorReports, exports & files

Every plant now has a "Reports" page

Every plant now has a "Reports" page, on which a template and a period are picked and the report generated and downloaded. While a report is built, its cover and language are set, text added, a chapter renamed or hidden, and the report published to keep its files available to download.

mirox 2.15.497 – 2.15.503
AgentFeatureMajorData collection

A Meier-NT ADL-MX data logger can now be added

A Meier-NT ADL-MXmini or ADL-MXSpro data logger can now be added and reads the Power-One / ABB Aurora inverters and Si irradiance sensor behind it: power, voltages, currents, temperatures, irradiation, wind speed, daily and total energy, and each inverter's reported operating state. Plants receive this with their next agent update.

mirox 2.15.497 – 2.15.503mirox-agents 3.2.87 – 3.2.91
Read more in the documentationData loggersInverter status codes
Web appFeatureMajorRevenue & market

A wind plant's curtailment settlement method can now be chosen

On a wind plant's "Market" tab, "Settlement method" now offers "Spitz Wind (power curve)", "Spitz Wind light (reference wind speed)" and "Pauschal Wind (flat rate)". Curtailed energy and its compensation are settled turbine by turbine against each turbine's certified power curve, and the plant figure is their sum.

mirox 2.15.494 – 2.15.496
Read more in the documentationMarketWindComponents
Web appFeatureMajorReports, exports & files

Reports and exports can use metrics an organization defines itself

The reports page now has a "Metrics" tab where an organization defines its own figures from the measurements its plants record, for use in reports and exports. A metric is reported as a plant value or per component, at a chosen finest resolution, and the assistant can write and check one inside the editor.

mirox 2.15.494 – 2.15.496
Read more in the documentationMy metricsReports
AgentFeatureMajorData collection

Bachmann SPPC and mtu EnergyPack now serve as data loggers

A Bachmann SPPC park controller and an mtu EnergyPack battery can now be added as data loggers, the SPPC reading the grid connection point and the grid operator's and direct marketer's limits, the EnergyPack its state of charge, health, stored energy and power limits, with the next agent update.

mirox 2.15.486 – 2.15.493mirox-agents 3.2.76 – 3.2.82
Read more in the documentationData loggers
AgentFeatureData collection

Each Janitza meter can now be assigned what it reads

At a plant with a battery behind its grid connection point, each Janitza meter can now be assigned what it reads: the grid connection point, the PV feeder or the battery feeder. PV and battery readings then stay separate from the plant's grid figures, with the next agent update.

mirox 2.15.486 – 2.15.493mirox-agents 3.2.76 – 3.2.82
Read more in the documentationData loggers
Web appFeatureMajorCurtailment & grid limits

A wind plant's "Turbines" page now shows curtailment losses by party

A wind plant's "Turbines" page now shows the energy lost to the grid operator, the direct marketer, environmental limits, stop commands and turbine faults. The losses are drawn as stacked areas on the day graph, as segments of the daily, weekly and monthly bars, and as a "Lost in total" figure.

mirox 2.15.468 – 2.15.483
Web appFeatureMajorAlerts & events

A plant with an alarm system now has an "Alarm system" page

A plant with an alarm system now has an "Alarm system" page, showing each contact's state, its history over 24 hours, 7 or 30 days, and the alarms raised. The intrusion panel and the communication cabinet's UPS, heating and main switch open a plant event while a contact stands and close it when it clears.

mirox 2.15.468 – 2.15.483
Read more in the documentationAlarmData loggers
Web appFeatureMajorWind turbines

Each turbine now shows its own status and the alarms it raised

A wind plant's "Turbines" page now carries a "Status" column with the maker's own wording for what each turbine reports. Opening a turbine shows a "Status & alarms" section that lists the alarms and warnings it has raised, standing and withdrawn.

mirox 2.15.457 – 2.15.467
Web appFeatureMajorWind turbines

A wind plant now has a "Components" page listing each turbine

A wind plant now has the same "Components" page a solar plant has, with rated power, review cards, tickets and open events for each turbine, plus search, sorting and paging. A datasheet carrying the power curve every analysis measures against can be assigned to several turbines or a whole data logger in one go.

mirox 2.15.457 – 2.15.467
AgentFeatureMajorBattery storage

A battery storage can now be added as a data logger

A battery storage can now be added as a data logger, and its converters, battery skids, and racks are then read with power, charge and discharge limits, state of charge, and the grid operator's limits on both charging and feed-in. Plants receive this with their next agent update.

mirox-agents 3.2.53 – 3.2.66mirox 2.15.457 – 2.15.467
Read more in the documentationData loggers
Web appFeatureMajorBattery storage

Battery plants now open on a "Production" page

A plant set up as a standalone battery plant now opens on "Production", showing what the storage exchanges with the grid and every storage unit in the plant. Where a feed-in meter reports, the page also shows grid power and today's export and import, and without one it shows the units alone.

mirox 2.15.443 – 2.15.446
Web appFeatureWind turbines

The "Turbines" page now graphs what each turbine measures

A wind plant's "Turbines" page now graphs everything the turbines report, one turbine at a time: "Power & wind" draws power and wind speed over time, and "Curve & wind rose" draws the power curve and the wind directions. A selected day now shows its full 24 hours.

mirox 2.15.443 – 2.15.446
AgentFeatureMajorData collection

Vestas wind turbines are now read through VestasOnline

A Vestas VestasOnline SCADA server can now be added as a data logger, and every turbine behind it is read — power, wind and its lifetime energy counter — and listed on the wind plant's "Turbines" page. Plants receive this with their next agent update.

mirox 2.15.428 – 2.15.442mirox-agents 3.2.32 – 3.2.41
Read more in the documentationData loggers
Web appFeatureMajorData collection

A plant's history now imports from its previous monitoring system

The "Import" tab on a plant's "Dataflow" page now takes the ZIP archive from the plant's previous monitoring system and matches its devices to components by serial number or name. The import runs day by day and can be paused, stopped, or have what it wrote deleted.

mirox 2.15.420 – 2.15.564
Web appFeatureMajorAlerts & events

Station icons on the analysis page now count inverters

On a plant's analysis page, the icons on each station row now count inverters rather than items: one blue wrench for each inverter with open service work. An icon opens a list of those inverters with everything open on each, each entry linking to its inverter.

mirox 2.15.407 – 2.15.419
Read more in the documentationInverter events
Web appFeatureBattery storage

The round-trip efficiency tile now follows the chosen range

The round-trip efficiency tile on the battery dashboard now follows the chosen range. The tile shows its own figure for windows of seven days or more, and the day view keeps the trailing week.

mirox 2.15.407 – 2.15.576
Web appFeatureMajorData collection

The wizard now adds SMA Data Manager and Sungrow loggers

Devices behind an "SMA Data Manager / Power Manager" or "Sungrow Logger" data logger are now listed and their alarms reach the plant's event list. A blue'Log logger gains a "String monitoring" section.

mirox 2.15.397 – 2.15.406
Read more in the documentationData loggers
Web appFeatureAlerts & events

Component problems now show what confirmed them and how devices ran

A component problem's "Confirmed by" now shows which measurement or device report opened the case, with an explanation of what it means, and a finding still being watched reads "Under observation". A "Reported operating states" section shows how long the machine spent throttling itself, capped, switched off or reporting a fault.

mirox 2.15.397 – 2.15.406
Read more in the documentationEventsInverter status codes
Web appFeatureMajorThe app itself

Graphs now zoom in by dragging across them

A graph now zooms into the window dragged across it, a double-click or "Reset zoom" goes back, and "Enlarge graph" opens it full screen. The production day graph now draws in five-minute steps and refines to one minute once zoomed below six hours.

mirox 2.15.394 – 2.15.396