Skip to content

October 2026

Changes released in October 2026.

Open in the full timeline

AgentFeatureWind turbines

Wind plants now show their production state on the plant monitor

A wind plant's production state on the plant monitor is now computed from the sum of its turbines' power. It no longer reads unknown with a standing warning. Plants receive this with their next agent update.

mirox-agents 3.2.232 – 3.2.234
Web appFeatureMajorAlerts & events

A battery unit not following its dispatch order raises an event

A battery unit idle or moving against its dispatch order for 15 minutes now raises an event on the plant's "Events" page. The event closes only when the unit or the storage as a whole follows an order again, or when its own fault stop, safety alarm or silence takes over.

mirox 2.15.757 – 2.15.768
Web appFeatureData collection

Sensors and feed-in meters show their logger and data state

On the plant's components page, in its sensor and meter tabs, each irradiation sensor and feed-in meter now shows which data logger serves it, its data state and its last data time. A logger filter narrows the table.

mirox 2.15.736 – 2.15.754
Web appFeatureAlerts & events

Events in the plant monitor can now be acknowledged

In the plant monitor, an event can now be acknowledged for up to 14 days or until a chosen day. A plant whose events are all acknowledged but not all on a ticket is marked with a crossed bell.

mirox 2.15.718 – 2.15.735
AgentFeatureAlerts & events

A no-communication summary groups silent inverters and combiner boxes

In a plant's event list, a no-communication summary now collects silent inverters, combiner boxes, turbines and battery storage into one notification, announced in 20-minute batches. It closes when every component reports again. Plants receive this with their next agent update.

mirox 2.15.704 – 2.15.777mirox-agents 3.2.185 – 3.2.234
Web appFeatureMajorSolar equipment

Trackers and plant controllers are now components of the plant

A solar plant's "Trackers" page shows its tracker field as control groups and individual trackers, with live state, a graph and batch editing. Where a plant has a plant controller, it shows under the graph on the "Trackers", battery dashboard, analysis and turbines pages.

mirox 2.15.696 – 2.15.703
Read more in the documentationSolar trackers
Web appFeatureUsers & access

Reports, metrics and alert items can be marked private

Report templates and chapters, My Metrics and Data Export templates, and the alert rules, receivers, or message templates in the Alarm Manager can be marked private. A private item is visible and usable to every member, with only its creator, an admin, or a moderator able to edit or delete it.

mirox 2.15.667 – 2.15.687
Web appFeatureMajorThe app itself

Maintenance operations are now tracked in the plant monitor

In the plant monitor, maintenance operations are now tracked as tickets with a contact, an expected fix date, and linked events and components. A maintenance state filter appears on the plant monitor and the dashboard.

mirox 2.15.665 – 2.15.777
Web appFeatureMajorProduction & yield

Wind plant production forecast now appears in the fleet forecast view

A wind plant's production forecast now appears in the fleet forecast view and on the plant's forecast strip as a five-day forecast with the wind speed at 10 m and at hub height. It settles about six hours behind real time.

mirox 2.15.660 – 2.15.664
Web appFeatureMajorUsers & access

Contact certificates can be uploaded to an organization

A contact's certificates are uploaded through a wizard in the organization and attached to the contact. The assistant reads each document's type, validity scope and expiry during the upload.

mirox 2.15.660 – 2.15.664
AgentFeatureMajorProduction & yield

A wind plant's expected production is now computed per turbine

A wind plant's expected production is now computed per turbine from the plant's measured weather, each turbine's power curve and hub height, and the air density. Plants receive this with their next agent update.

mirox 2.15.660 – 2.15.664mirox-agents 3.2.166 – 3.2.167
Web appFeatureMajorAlerts & events

A plant's "Events" page now lists every event as a table

The plant menu's "Events" page now replaces "Activity" under "Core Data". It lists every event of the plant as a table, open ones on top, with Source and Component header filters and a search box.

mirox 2.15.655 – 2.15.659
Web appFeatureMajorAlerts & events

A plant's events can now be closed, reported or escalated by hand

In a plant's event dialog, an event can now be closed, reported, or escalated by a job operator or technical operations manager. An open inverter or combiner box no-communication event can be escalated to an outage, with a notification naming who escalated it and the comment.

mirox 2.15.655 – 2.15.659
Web appFeatureThe app itself

A support request can be closed or reopened by its customer

On the support page, a request can be closed or reopened by its customer, and a message into a closed request reopens it. An answered request with no activity for 7 days closes itself with a reminder one day before.

mirox 2.15.646 – 2.15.652
AgentFeatureMajorData collection

An inverter can now be added as a data logger

An inverter can now be added as a data logger, reading its live output, energy, status and alarm codes, and backfilling its day curve from the inverter's web interface at 15-minute steps. Plants receive this with their next agent update.

mirox 2.15.646 – 2.15.652mirox-agents 3.2.160 – 3.2.161
Web appFeatureMajorUsers & access

A "Client" role grants a plant's customer read-only access

A "Client" role below "Viewer" now appears in a plant's grant dialogs for the plant's customer, with an "Access until" expiry. It has access to live and historical operating data — production, battery, turbines, analysis, forecast and market prices — but not events, tickets, reports, exports, files, network or money figures, or plant push notifications.

mirox 2.15.627 – 2.15.631
Web appFeatureMajorRevenue & market

The assistant now estimates a plant's lost energy and its value

The assistant now estimates the energy a plant lost over a stated window, such as an outage, and its value per month at the plant's EEG value or market value, or a marked flat rate. For plants in the German market, the estimate carries a euro figure.

mirox 2.15.627 – 2.15.631
Web appFeatureMajorRevenue & market

A "Subscription" page now replaces the organization's "Contract" tab

The framework contract is now signed on the "Subscription" page, which replaces the "Contract" tab and the former subscription page. It shows the company that pays for each plant part, payment bundles, the subscription term, and the contract state.

mirox 2.15.622 – 2.15.659
Web appFeatureMajorNetwork & remote access

A device's web page now opens with a header and its stored login

A device's web interface opened through remote device access now appears under a header with the device's name, the time left on the second-factor confirmation, and controls for its stored login. The second-factor dialog appears in the page itself.

mirox 2.15.622 – 2.15.626
Web appFeatureAlerts & events

Webhook receivers now always send with an organization template

In the "Alarm Manager," a webhook receiver now always sends with one of the organization's templates. The receiver dialog lists the organization's templates, with the ready-made examples under "Templates".

mirox 2.15.620 – 2.15.621
Web appFeatureNetwork & remote access

Site VPN cards now show a traffic panel per tunnel

The plant's Site VPN cards now show a traffic panel per tunnel, with received and sent data on one scale and the connection state over it, following the page's time window. Up to three days shows a curve, up to ninety days a bar per day, and beyond that a bar per month.

mirox 2.15.620 – 2.15.621
Web appFeatureMajorAlerts & events

The alert rule now carries the outage report

An alert rule now carries the outage report, with the direct marketer connection's one read-only receiver in the "Alarm Manager". The alert's "Deliveries" list shows each receiver at the outage's start, renewal and end.

mirox 2.15.619
Read more in the documentationAlerts and notifications
AgentFeatureMajorData collection

A wind plant's SCADA can now be added as a data logger

A wind plant's SCADA can now be added as a data logger, reading each turbine's production, its stop commands with their cause, the grid operator or the direct marketer, and the grid operator's setpoint. Plants receive this with their next agent update.

mirox 2.15.614 – 2.15.619mirox-agents 3.2.144
Web appFeatureMajorWind turbines

A wind plant now has an "Unavailability" page

A wind plant's "Unavailability" page now lists its outages and curtailments as a register per turbine, with a timeline, the reasons and the report to the direct marketer. The organization's "Direct marketers" section lists each connection, and each turbine's serial number is now editable.

mirox 2.15.608 – 2.15.613
Web appFeatureUsers & access

The moderator role now manages members and cooperations

Member management and cooperation changes in the organization are now handled by the moderator role alongside the admin: inviting and removing members, changing their roles, joining and removing a cooperation, and changing its shared permissions. The technical asset manager role still sees the team but no longer manages it.

mirox 2.15.607 – 2.15.777
Web appFeatureMajorAlerts & events

A Modbus reader can be added with its own alarm signals

A Modbus reader can now be added as a data logger with its own alarm signals. Each signal has a level, a mode, and a minimum duration before it raises an alarm, and the plant's "Alarm system" page shows its state and its history.

mirox 2.15.600 – 2.15.606
Web appFeatureMajorProduction & yield

A plant's history can be imported from its data logger archives

Historical plant data can now be imported from its data logger archives at a chosen resolution (5-minute, 15-minute, or the original), with a minimum of 3 years of coverage. While the import runs, the plant's pages show an import banner with its progress.

mirox 2.15.600 – 2.15.606
Web appFeatureMajorAlerts & events

Turbines and battery units now raise health alarms

On the plant monitor, each turbine and battery unit now shows its health — fault, no communication, or paused — with a dialog naming why a unit is paused and since when. A unit safety alarm opens a notification linking to the unit's page, and the alarm is not silenced during a storm.

mirox 2.15.597 – 2.15.599
Web appFeatureMajorRevenue & market

Reports now show expected revenue and a financial performance ratio

In reports, exports and the assistant, revenue now shows beside "Expected revenue" — the yield report's planned feed-in at the plant's EEG tariff, aged by module degradation — and a "Financial performance ratio", actual revenue divided by expected. A running month's expected revenue stops at the current moment, in reports, exports and the assistant.

mirox 2.15.595 – 2.15.596
Web appFeatureMajorThe app itself

Plant pages now show days in the plant's own timezone

The "Production", "Turbines", analysis and battery dashboard pages now draw days, heatmaps and curtailment in the plant's own timezone, including 23-hour and 25-hour days at a daylight-saving switch. On the dashboard, a zone selector aligns every plant to the browser zone, UTC or one chosen zone.

mirox 2.15.593 – 2.15.594
Web appFeatureMajorReports, exports & files

The "Reports" page now offers a "Technical Report" template

The "Reports" page now offers a "Technical Report" template with the plant's master data, panel and inverter inventories, a performance ratio analysis by day and month, a metrics chapter, high-priority events and a glossary. The template's title page can be composed in the editor and matches the PDF and document exports.

mirox 2.15.587 – 2.15.592
AgentFeatureMajorData collection

A power quality analyzer can now be added as a feed-in meter

A power quality analyzer can now be added as a feed-in meter and reads the grid, the PV feeder or the battery feeder. Plants receive this with their next agent update.

mirox 2.15.587 – 2.15.592mirox-agents 3.2.131