Skip to content

Changelog

Every change to Mirox, grouped by month. Filter by group or by kind of change.

Clear filters

October 20264

AgentFixMajorCurtailment & grid limits

Settlement months no longer finalize while satellite days are missing

A curtailment settlement month is no longer finalized while satellite data is still missing. It is rebuilt once more if that data arrives up to 14 days after the month's deadline. Plants receive this with their next agent update.

mirox-agents 3.2.153 – 3.2.157
AgentFixMajorCurtailment & grid limits

Curtailment figures now include the direct-marketer setpoint

Curtailment figures now include the plant controller's power cap and the direct marketer's active-power setpoint. The curtailment figure no longer reads too low where either ran. Plants receive this with their next agent update.

mirox-agents 3.2.153 – 3.2.244
AgentFixMajorCurtailment & grid limits

Curtailment settlement and lost energy no longer read too low

Curtailment settlement and lost energy no longer read too low for a period that started after a quiet stretch. The current and previous month are recalculated on the next run, and older months keep their value. Plants receive this with their next agent update.

mirox-agents 3.2.135

September 20264

AgentFixMajorCurtailment & grid limits

A direct marketer's limit now reads against the plant's own setpoint

The limit a direct marketer states was shown twice, once against the plant controller's own rating. It is now a single figure against the plant's own setpoint, and the plant's curtailed energy is corrected. Plants receive this with their next agent update.

mirox-agents 3.2.102 – 3.2.112
AgentFixMajorCurtailment & grid limits

Close-to-live curtailment no longer shows impossible values

Curtailment and compensation shown close to live no longer show impossible values. A plant whose reference days all fail the plausibility check shows no close-to-live figure, and issued figures keep their value. Plants receive this with their next agent update.

mirox-agents 3.2.102 – 3.2.112
AgentFixMajorCurtailment & grid limits

Close-to-live curtailment at battery plants no longer reads too high

Curtailment and compensation shown before the settlement at plants with battery storage now come from what the inverters produced, not from the feed-in meter behind the battery. They fall wherever the plant was charging or discharging while a limit was in force, and plants receive this with their next agent update. Plants receive this with their next agent update.

mirox-agents 3.2.50 – 3.2.51
AgentFixMajorCurtailment & grid limits

Lost energy no longer counts a pause in data collection as zero

Curtailment losses previously read too high for any quarter-hour in which the on-site data collection paused: those minutes counted as zero production. Those minutes now count at the rate the measured minutes around them show, and lost energy and compensation fall for such quarter-hours.

mirox-agents 3.2.14 – 3.2.23

August 20265

AgentImprovements and fixesCurtailment & grid limits

Phoenix Contact Power Control Unit 4.0 controllers now report their limits, and a curtailed plant no longer raises underperformance alerts.

  • A Phoenix Contact Power Control Unit 4.0 now reports the grid operator's and direct marketer's limits and the setpoints given to the battery.
  • Inverters at a plant held down by the grid operator or the direct marketer are no longer reported as producing far below expectation.
  • A day on which half of a plant's components fall below expectation no longer raises an underperformance event on each of them.
  • A Phoenix Contact controller whose web interface has no login can now be added without one.
mirox-agents 3.1.416 – 3.1.417mirox 2.15.361 – 2.15.366
Read more in the documentationData loggers
AgentFeatureMajorCurtailment & grid limits

A Zebotec park controller now shows its power limits

A Zebotec PVPC park controller now shows the plant's active-power setpoints — the limit from the grid operator, the limit from the direct marketer, and the one the controller is acting on — each in percent of the plant's nameplate power. Plants receive this with their next agent update.

mirox-agents 3.1.250 – 3.1.256
AgentFeatureMajorCurtailment & grid limits

A Wattkraft Parkcontrol park controller now needs only its address

A Wattkraft Parkcontrol park controller is now read from its address alone, without a login, delivering the active-power setpoints of the grid operator and the direct marketer, which of them is in force, and whether the link to the direct marketer is up.

mirox-agents 3.1.243
AgentFixMajorCurtailment & grid limits

Flat-rate settlement now deducts the direct marketer's share

In a "Redispatch settlement" event, the lost energy worked out by the flat-rate (pauschal) method previously counted quarter-hours the direct marketer had curtailed at the same time. For months from July 2026 the figure is net of that share and decreases where the two overlapped, while earlier months keep the gross figure. Plants receive this with their next agent update.

mirox 2.15.144 – 2.15.151mirox-agents 3.1.214
Read more in the documentationMarket
AgentFeatureCurtailment & grid limits

Direct-marketer curtailments now get a "Marketer settlement" event

For each curtailment measure by the direct marketer, the lost energy is now recorded as a "Marketer settlement" event on the plant's "Activity" page, beside the "Redispatch settlement" events of grid-operator curtailments. The measure's own day can serve as its reference day, since only grid-operator curtailments disqualify a day. Plants receive this with their next agent update.

mirox 2.15.126 – 2.15.129
Read more in the documentationMarket

July 20264

June 20264

May 20261