Skip to content

September 2026

Changes released in September 2026.

Open in the full timeline

Web appImprovements and fixesThe app itself

The plant activity heatmap no longer lights cells from before onboarding, and the solar segment filter no longer returns an error. A plant's timezone now follows its coordinates.

  • On a plant's "Activity" page, the heatmap no longer lights cells from before the plant was onboarded.
  • On a plant's solar strings and generator connection point lists, the segment filter no longer returns an error.
  • Onboarding a data logger whose account still has its initial password now explains the one-time password change in the logger's web interface.
  • A plant's timezone now follows its coordinates when the plant is created or its coordinates change.
mirox 2.15.581 – 2.15.586
AgentImprovements and fixesBattery storage

The direct marketer's battery setpoint is read from one more plant controller layout. A battery converter's voltages now read in volts, and the first data collection cycle at a battery plant finishes in seconds.

  • A battery storage power converter that reports voltages with no declared unit now reads them in volts.
  • The first data collection cycle at a battery plant no longer reads the cell tabs, so it finishes in seconds instead of a minute.
mirox-agents 3.2.128 – 3.2.130
Web appFixMajorCurtailment & grid limits

Raw wind curtailment columns no longer come back empty

The raw curtailment columns of a wind plant settled as "Spitz Wind (power curve)", "Spitz Wind light (reference wind speed)" or "Pauschal Wind (flat rate)" no longer come back empty in exports. They now carry the value.

mirox 2.15.580
Web appImprovements and fixesThe app itself

The metric editor's assistant no longer hangs on a proposal. It applies each proposal as it arrives.

  • A solar string with no tilt value no longer reads as needing attention on the components page.
  • The battery dashboard day graph now shows the day-ahead price as a reference line across the full delivery day.
  • Each battery dashboard tile now explains how its figure is evaluated.
  • The plant controller onboarding wizard now offers a "Re-probe" button.
  • A chosen light or dark theme is now shared across Mirox pages.
mirox 2.15.572 – 2.15.576
Web appFixAlerts & events

An inverter fault now opens its outage under curtailment

An inverter that reports a fault no longer opens its outage only after a curtailment cap or low light has lifted. The event dialog shows which condition it overrode, with the maker's status and text.

mirox 2.15.553 – 2.15.564
AgentFixMajorCurtailment & grid limits

A direct marketer's limit now reads against the plant's own setpoint

The limit a direct marketer states was shown twice, once against the plant controller's own rating. It is now a single figure against the plant's own setpoint, and the plant's curtailed energy is corrected. Plants receive this with their next agent update.

mirox-agents 3.2.102 – 3.2.112
AgentFixMajorCurtailment & grid limits

Close-to-live curtailment no longer shows impossible values

Curtailment and compensation shown close to live no longer show impossible values. A plant whose reference days all fail the plausibility check shows no close-to-live figure, and issued figures keep their value. Plants receive this with their next agent update.

mirox-agents 3.2.102 – 3.2.112
AgentFixSolar equipment

A dead voltage sense line now reads as missing, not zero production

A combiner box behind a data logger previously showed a measured 0 W while its strings carried real current. A missing channel now shows nothing, and an explicit zero still reads as zero. Plants receive this with their next agent update.

mirox-agents 3.2.102 – 3.2.112
Web appImprovements and fixesThe app itself

The "Outage summary" table now lists a month's inverter faults with each fault's energy lost. Reports now print in four more languages.

  • In a plant's "Reports" page, the "Outage summary" table lists the month's inverter faults per inverter or per station, with events, duration and energy lost.
  • The "Outage summary" can show the revenue the lost production would have earned, for members with the accounting permission.
  • Reports can now be generated in six languages, with Spanish, French, Italian and Portuguese joining English and German.
  • The component-outage summary no longer marks each inverter's curve on the analysis graph or the production page.
  • The assistant no longer answers with incoherent text.
  • On the networking page, a web interface that was detected once is no longer removed when it is not detected again.
mirox 2.15.539 – 2.15.552
AgentImprovements and fixesAlerts & events

Plant outages, device faults and event times now read as the devices ran. Outages no longer open from a zero combiner box reading, and event times no longer carry the timezone offset.

  • A combiner box that reports zero power against its own live readings no longer opens an outage.
  • A silent inverter now opens a plant alarm after 12 hours.
  • Two data loggers can now be added, reading combiner boxes, strings, the grid meter, irradiation and temperature sensors, and curtailment limits.
  • A plant-wide grid trip is no longer recorded as a device fault.
  • Event times from the data logger are no longer off by the timezone offset.
mirox 2.15.539 – 2.15.552mirox-agents 3.2.102 – 3.2.112
AgentFixAlerts & events

A closed outage lists every component that was down

A closed outage previously named only the components that recovered last — 7 of 17 silent inverters — and now lists the whole incident. A device fault no longer reopens once the device has withdrawn every fault code, and no longer reads "Live" after an outage takes it over. Plants receive this with their next agent update.

mirox 2.15.536 – 2.15.538mirox-agents 3.2.97
Web appImprovements and fixesThe app itself

The live view of a network camera and MQTT-over-WebSocket devices now connect through the plant's remote access. The monitor's table now sorts by portfolio name, then plant name.

  • The live view of a network camera and MQTT-over-WebSocket devices now connect through the plant's remote access.
  • The monitor's table now sorts by portfolio name, then plant name.
  • The filename in the storage explorer stays visible on a narrow screen, with size and date below it.
  • Uploader and "Shared by" avatars in storage now use the member's first and last name.
  • The PDF attached to a Mirox email now arrives as a normal attachment.
  • The footer of sign-out pages and emails now links the changelog and the roadmap.
mirox 2.15.536 – 2.15.538
Web appFixNetwork & remote access

Remote-access shares now stay open until the chosen expiry

A remote-access (VPN) share no longer closes by itself one hour after the technician's connection comes up. It stays available until the expiry chosen when sharing, or until it is revoked.

mirox 2.15.533
Internal improvementsFixUsers & access

Role changes now reach the embedded Grafana dashboards

The embedded Grafana dashboards now pick up a member's changed role at the member's next sign-in to the dashboards instead of keeping the old role. An access update after a change in one organization now touches only that organization's portfolios and completes sooner.

mirox 2.15.533
Web appImprovements and fixesThe app itself

Embedded dashboards now show a renamed inverter, combiner box or string under a single name again, instead of splitting it across two rows.

  • A change to someone's access to the embedded dashboards now takes effect the next time that person signs in.
  • A router set up from a plant's OpenVPN file and certificate archive now works.
  • After a plant's VPN certificates are renewed, "Download certificates as archive" provides them again, as when the connection was first set up.
  • The assistant now says that an INSYS icom OS router takes the static key under "Static OpenVPN keys", not through its certificate import.
  • A page that cannot load its translations now opens in English instead of failing to open at all.
mirox 2.15.522 – 2.15.532
Read more in the documentationGrafana dashboardsDirect VPN
Web appImprovements and fixesNetwork & remote access

Remote-access routes are now listed in the order they are used. Each column can be filtered, each subnet shows its name and tags, and a conflict names the other plant it is with.

  • One plant can be made the winner of every subnet conflict it is in, in a single step.
  • On the "Metrics" tab, "Revert" in the chat undoes a figure the assistant put into the editor.
  • One of an organization's own figures can be averaged across a plant's components, with "By peak power" offered as a ready-made option.
  • Opening a page while the app is moving to a new version now waits for it to finish instead of showing an error.
mirox 2.15.497 – 2.15.503
Read more in the documentationDirect VPNMy metrics
AgentFixMajorWind turbines

Weather wind speed no longer reads 3.6 times too high

Wind speed and wind gusts from the weather service were previously recorded in km/h under an m/s label, so the values shown read about 3.6 times too high. They are now recorded in m/s, and values recorded earlier keep the old figure.

mirox-agents 3.2.85
Web appImprovements and fixesThe app itself

A plant's core data gains a "Yield report" tab, report charts are set per series, and the web app opens faster.

  • A plant's core data has a "Yield report" tab: monthly performance ratio and irradiation targets, with expected production calculated from them.
  • A month with no yield-report value uses a default, and a performance ratio far from that month's typical value is marked "Unusual".
  • Report charts can be set per series to bar or line, stacked, filled, with up to two unit axes, or drawn as a heatmap.
  • Each report block can carry its own period, chosen in the editor and the wizard, independent of the report's period.
  • The cell balance card of an INTILION storage now names where the weakest and strongest cell and the hottest module sit.
  • The web app opens faster: the first page loads only what it needs, and only the language in use.
mirox 2.15.494 – 2.15.496
Read more in the documentationReports
Web appFixMajorProduction & yield

Wind plants' daily energy no longer jumps by impossible amounts

Days that read tens of GWh too high or too low, after a turbine's history was read in again or after a turbine fell silent, now show what the turbines actually produced. The corrected figures appear in the day, week, month and year views and on the day power curve.

mirox 2.15.468 – 2.15.483
Web appImprovements and fixesThe app itself

A plant's report can now be exported as full data from its library. Each report section states what the PDF prints and what the export carries.

  • A plant's report can now be exported as a CSV zip, XLSX or JSON from its library.
  • The plant's day graph on the monitor now shows production, expected output and curtailment on hover.
  • When remote access is down, the assistant now suggests checks that only read the site's router.
  • The battery "Energy flow" page now shows the full cycle count.
mirox 2.15.468 – 2.15.483
Read more in the documentationDirect VPN
AgentImprovements and fixesData collection

A wind plant without a feed-in meter now gets its production from the turbines' lifetime energy counters. It no longer raises a fault for the missing meter.

  • A battery's control signal now reads zero on its chart while the direct marketer is connected and asking for nothing.
  • A battery plant's settlement no longer drops quarter-hours after each restart of the on-site data collection.
mirox 2.15.468 – 2.15.483mirox-agents 3.2.67 – 3.2.72
Read more in the documentationData loggers
Web appImprovements and fixesThe app itself

The monitor now counts an inverter with reduced output as down, the way it counts an outage. The battery dashboard now draws a dispatch command a plant states in watts.

  • The monitor now counts an inverter with reduced output on the down side of a plant's "State", as it already counts an outage.
  • Filtering the monitor's plant list by state now answers in a couple of seconds instead of leaving the list loading.
  • The battery dashboard now draws the marketer's dispatch command when a plant states it in watts, instead of leaving the chart and card empty.
  • The "Control signal" card and the chart tooltip no longer show the opposite sign to the power figures beside them.
  • A standalone battery plant now opens on its battery dashboard, and old links to its retired "Production" page still work.
mirox 2.15.457 – 2.15.467
AgentImprovements and fixesAlerts & events

An alarm or fault reported by an inverter now stays open until the inverter itself withdraws it. It no longer disappears from the list on its own.

  • An alarm raised by an inverter no longer closes just because part of its alarm list could not be read.
  • A fault reported by an inverter no longer closes on its own after the on-site data collection restarts.
  • A low-insulation warning no longer stays shown as active after the inverter has withdrawn it.
  • A battery unit read by a second data logger no longer keeps the make and model of the previous one.
  • The grid operator's ceilings on a battery storage's charging and discharging now appear on the plant's "Control Units" tab.
  • Wind and battery plants now receive the site's weather data — temperature, wind, precipitation, snow and irradiation.
mirox-agents 3.2.53 – 3.2.66mirox 2.15.457 – 2.15.467
Web appFixMajorCurtailment & grid limits

The dashboard's curtailment now comes from the settled figures

The dashboard's curtailment chart and cards now show the same settled figures as a plant's production page, with quarter-hours not yet settled filled in close to live. Curtailment from before June 2026 is no longer shown on the dashboard because it came from an older calculation, while figures already issued keep their value.

mirox 2.15.447 – 2.15.456
AgentFixMajorCurtailment & grid limits

Close-to-live curtailment at battery plants no longer reads too high

Curtailment and compensation shown before the settlement at plants with battery storage now come from what the inverters produced, not from the feed-in meter behind the battery. They fall wherever the plant was charging or discharging while a limit was in force, and plants receive this with their next agent update. Plants receive this with their next agent update.

mirox-agents 3.2.50 – 3.2.51
AgentFixAlerts & events

An inverter the data logger cannot read is no longer called faulty

A plant no longer opens an "Inverter device fault" when its data logger reports it cannot read an inverter and no readings arrive. A low-priority "Logger cannot reach inverter" entry opens instead and becomes "Inverter not communicating" after an hour of daylight, and plants receive this with their next agent update.

mirox 2.15.447 – 2.15.456mirox-agents 3.2.50 – 3.2.51
Read more in the documentationInverter events
Web appImprovements and fixesThe app itself

Plants have a "Reports" page, the organization's "Resources" tab opens again, and plant lists gain a "State" column.

  • A plant's "Reports" page now assembles a report from chosen sections, with a preview and a PDF or JSON download.
  • The "Resources" tab on the organization page opens again where it lists a plant with wind turbines.
  • The monitor and dashboard plant lists now carry a "State" column — "Alert", "Warning", "Communication issue", "Disconnected", "Check" or "Inactive".
  • The "Turbines" page now shows each turbine's "Utilization (capacity factor)" and, where a datasheet is known, the maker's "Reference curve" with its "Validity band".
mirox 2.15.447 – 2.15.456
Read more in the documentationInverter events
AgentImprovements and fixesData collection

Inverters behind a data logger are read again after a missed reply. Wind turbines and battery modules no longer read as offline for most of the day.

  • An inverter behind a data logger is read again after a missed reply, instead of dropping out of the data.
  • Wind turbines and battery modules no longer read as offline for most of the day while their connection is checked every 30 minutes.
  • A plant's mean irradiation no longer includes a reading higher than the sun can deliver.
mirox-agents 3.2.50 – 3.2.51
AgentFixMajorProduction & yield

Wind and battery plants are no longer measured as solar plants

A plant set up as a wind plant or a standalone battery plant is no longer measured as if it had panels: it no longer shows an expected-production curve, a clear-sky reference, a performance ratio or curtailment figures. Solar plants are unchanged, and plants receive this with their next agent update.

mirox 2.15.428 – 2.15.442mirox-agents 3.2.32 – 3.2.41
AgentFixMajorCurtailment & grid limits

Lost energy no longer counts a pause in data collection as zero

Curtailment losses previously read too high for any quarter-hour in which the on-site data collection paused: those minutes counted as zero production. Those minutes now count at the rate the measured minutes around them show, and lost energy and compensation fall for such quarter-hours.

mirox-agents 3.2.14 – 3.2.23
Web appImprovements and fixesBattery storage

A ticket can now be raised on a battery container, rack, module or cell, and measurement exports and calendars reach back to 2020.

  • A ticket can now be raised on a battery container, rack, module or cell, and those tables show its open tickets.
  • Measurement exports now reach back to 2020, and every calendar has a year dropdown for picking an older day.
  • A site router that connects over IPsec without naming the identity it expects from Mirox is authenticated again instead of being refused.
  • A wind plant now has the same step-by-step setup page as a solar plant.
mirox 2.15.420 – 2.15.422
Read more in the documentationMetrics export APIDirect VPN
AgentImprovements and fixesAlerts & events

A faulty irradiation sensor no longer triggers false inverter outages, and a plant's total feed-in energy is no longer missing after an inverter replacement or a restart of the on-site data collection.

  • A daylight reading an irradiation sensor cannot physically deliver is now refused, and inverters are no longer declared in outage against it.
  • A plant's total feed-in energy is published again after an inverter has been replaced, or after the on-site data collection restarted.
mirox-agents 3.2.14 – 3.2.23
AgentImprovements and fixesAlerts & events

Alarms reported by inverters now open, close and are counted the way their maker intends.

  • An emergency stop, a device fault or a latched arc fault no longer clears itself while the inverter is still reporting it.
  • Sungrow fan messages now appear as warnings rather than faults, as Sungrow itself rates them.
  • Measurements taken while the plant cannot reach Mirox are now stored and sent on once the connection returns.
  • An inverter that keeps falling back into the same reported state keeps one open entry, and every recurrence is counted.
  • An alarm an inverter first reported as a warning and then as a fault now shows the more serious of the two.
mirox 2.15.407 – 2.15.419mirox-agents 3.2.4 – 3.2.12
Read more in the documentationInverter status codes
Web appImprovements and fixesAlerts & events

A brief network glitch at a plant no longer reads as an internal problem. Battery racks, modules and cells list in position order, and the battery power graph marks AC and DC readings.

  • The plant connection view now reads "Agent restarting or reconnecting" for five minutes before it calls the problem "Internal service issue".
  • A device that went down during an outage on that path reads "Reconnecting" for three minutes after the connection returns.
  • The details panel on that view no longer closes when a date range is picked.
  • Battery racks, modules and cells now list in position order, instead of Cell 1, Cell 10, Cell 100.
  • The battery power graph now marks a reading "AC · converters" or "DC · racks", and containers and racks measure DC only.
mirox 2.15.397 – 2.15.406
AgentImprovements and fixesData collection

Linyang battery alarms name their condition, Phoenix Contact WebVisit park controllers report their limits and setpoints, and blue'Log loggers stay connected at plants with many strings and sensors.

  • Alarms from Linyang containers now name the condition, such as a charge over-temperature, instead of only an alarm level.
  • A Phoenix Contact park controller with a WebVisit interface now reports grid and marketer limits, and the setpoints applied.
  • blue'Log loggers no longer drop in and out at plants with many strings and sensors.
mirox 2.15.397 – 2.15.406mirox-agents 3.1.449 – 3.1.454
Read more in the documentationData loggers
Web appFixMajorBattery storage

Battery cells now show only the temperatures the device measures

Linyang battery containers previously showed six temperature readings that no sensor takes, and modules 3 and 4 showed no temperature at all. Those readings have been removed, and cell temperatures are now filed under the right module.

mirox 2.15.394 – 2.15.396
AgentFixAlerts & events

A curtailed plant now reads as producing, not as shut down

A plant held at its grid operator's or direct marketer's limit now reads as producing, not "Grid Shutdown" or "External Shutdown". One long curtailment no longer fills the event list with dozens of entries.

mirox-agents 3.1.445 – 3.1.446
Web appImprovements and fixesSolar equipment

The components and analysis pages can now be filtered by how many of an inverter's strings are verified.

  • Components tables now sort by model, serial number, peak power, combiner boxes and strings.
  • Sorting the components list by segment or peak power no longer blanks the counts in its Analysis column.
  • Opening the add-string dialog on the components page no longer blanks the page.
  • A past day opened from a week or month view no longer counts up as though it were today.
  • The analysis page's orientation filter is gone, and its station, inverter and combiner-box pickers now sit in their tables' column headers.
mirox 2.15.394 – 2.15.396
Read more in the documentationComponents
AgentImprovements and fixesData collection

Expected power is worked out again through stretches where irradiation readings were lost, and Huawei inverters now report model, firmware and rated power.

  • Irradiation sensors are no longer reported as sending nothing for hours at a time, and expected power and performance ratio are worked out again.
  • Huawei inverters now report their manufacturer, model, firmware version and rated power in their component details.
mirox-agents 3.1.445 – 3.1.446
Read more in the documentationComponents