Skip to content

September 2026

Changes released in September 2026.

Open in the full timeline

Web appFeatureMajorReports, exports & files

The "Reports" page now shows data readiness before publishing

The "Reports" page now shows data readiness in four rows, monitoring, satellite, settled curtailment and official prices. Publishing a report lists non-final metrics with "Regenerate first" or "Publish anyway", and a recomputed settled month reads "Out of date".

mirox 2.15.581 – 2.15.586
Web appImprovements and fixesThe app itself

The plant activity heatmap no longer lights cells from before onboarding, and the solar segment filter no longer returns an error. A plant's timezone now follows its coordinates.

  • On a plant's "Activity" page, the heatmap no longer lights cells from before the plant was onboarded.
  • On a plant's solar strings and generator connection point lists, the segment filter no longer returns an error.
  • Onboarding a data logger whose account still has its initial password now explains the one-time password change in the logger's web interface.
  • A plant's timezone now follows its coordinates when the plant is created or its coordinates change.
mirox 2.15.581 – 2.15.586
Web appFixMajorCurtailment & grid limits

Raw wind curtailment columns no longer come back empty

The raw curtailment columns of a wind plant settled as "Spitz Wind (power curve)", "Spitz Wind light (reference wind speed)" or "Pauschal Wind (flat rate)" no longer come back empty in exports. They now carry the value.

mirox 2.15.580
Web appImprovements and fixesThe app itself

The metric editor's assistant no longer hangs on a proposal. It applies each proposal as it arrives.

  • A solar string with no tilt value no longer reads as needing attention on the components page.
  • The battery dashboard day graph now shows the day-ahead price as a reference line across the full delivery day.
  • Each battery dashboard tile now explains how its figure is evaluated.
  • The plant controller onboarding wizard now offers a "Re-probe" button.
  • A chosen light or dark theme is now shared across Mirox pages.
mirox 2.15.572 – 2.15.576
Web appFixAlerts & events

An inverter fault now opens its outage under curtailment

An inverter that reports a fault no longer opens its outage only after a curtailment cap or low light has lifted. The event dialog shows which condition it overrode, with the maker's status and text.

mirox 2.15.553 – 2.15.564
Web appImprovements and fixesThe app itself

The "Outage summary" table now lists a month's inverter faults with each fault's energy lost. Reports now print in four more languages.

  • In a plant's "Reports" page, the "Outage summary" table lists the month's inverter faults per inverter or per station, with events, duration and energy lost.
  • The "Outage summary" can show the revenue the lost production would have earned, for members with the accounting permission.
  • Reports can now be generated in six languages, with Spanish, French, Italian and Portuguese joining English and German.
  • The component-outage summary no longer marks each inverter's curve on the analysis graph or the production page.
  • The assistant no longer answers with incoherent text.
  • On the networking page, a web interface that was detected once is no longer removed when it is not detected again.
mirox 2.15.539 – 2.15.552
Web appImprovements and fixesThe app itself

The live view of a network camera and MQTT-over-WebSocket devices now connect through the plant's remote access. The monitor's table now sorts by portfolio name, then plant name.

  • The live view of a network camera and MQTT-over-WebSocket devices now connect through the plant's remote access.
  • The monitor's table now sorts by portfolio name, then plant name.
  • The filename in the storage explorer stays visible on a narrow screen, with size and date below it.
  • Uploader and "Shared by" avatars in storage now use the member's first and last name.
  • The PDF attached to a Mirox email now arrives as a normal attachment.
  • The footer of sign-out pages and emails now links the changelog and the roadmap.
mirox 2.15.536 – 2.15.538
Web appFixNetwork & remote access

Remote-access shares now stay open until the chosen expiry

A remote-access (VPN) share no longer closes by itself one hour after the technician's connection comes up. It stays available until the expiry chosen when sharing, or until it is revoked.

mirox 2.15.533
Web appSecurityThe app itself

Security updates

Third-party components were updated to close published vulnerabilities. No action is required.

mirox 2.15.533
Web appImprovements and fixesThe app itself

Embedded dashboards now show a renamed inverter, combiner box or string under a single name again, instead of splitting it across two rows.

  • A change to someone's access to the embedded dashboards now takes effect the next time that person signs in.
  • A router set up from a plant's OpenVPN file and certificate archive now works.
  • After a plant's VPN certificates are renewed, "Download certificates as archive" provides them again, as when the connection was first set up.
  • The assistant now says that an INSYS icom OS router takes the static key under "Static OpenVPN keys", not through its certificate import.
  • A page that cannot load its translations now opens in English instead of failing to open at all.
mirox 2.15.522 – 2.15.532
Read more in the documentationGrafana dashboardsDirect VPN
Web appFeatureMajorUsers & access

Files and folders can now be shared outside the organization

A file or folder from a plant or an organization can now be sent to someone outside it, who opens it with a link plus a 6-digit code or a set password, within chosen expiry, visit and download limits. A "Shares" tab now lists every share and what each visitor did.

mirox 2.15.504 – 2.15.512
Web appFeatureMajorNetwork & remote access

Remote access can now be handed to a technician without an account

Remote access to a plant can now be handed to an external technician as a link with its own password, without an account. The page behind the link provides the connection file, shows whether the connection is live, and lets the technician read the server's settings and log and test their own side.

mirox 2.15.504 – 2.15.512
Read more in the documentationDirect VPN
Web appFeatureMajorReports, exports & files

Every plant now has a "Reports" page

Every plant now has a "Reports" page, on which a template and a period are picked and the report generated and downloaded. While a report is built, its cover and language are set, text added, a chapter renamed or hidden, and the report published to keep its files available to download.

mirox 2.15.497 – 2.15.503
Web appImprovements and fixesNetwork & remote access

Remote-access routes are now listed in the order they are used. Each column can be filtered, each subnet shows its name and tags, and a conflict names the other plant it is with.

  • One plant can be made the winner of every subnet conflict it is in, in a single step.
  • On the "Metrics" tab, "Revert" in the chat undoes a figure the assistant put into the editor.
  • One of an organization's own figures can be averaged across a plant's components, with "By peak power" offered as a ready-made option.
  • Opening a page while the app is moving to a new version now waits for it to finish instead of showing an error.
mirox 2.15.497 – 2.15.503
Read more in the documentationDirect VPNMy metrics
Web appFeatureMajorRevenue & market

A wind plant's curtailment settlement method can now be chosen

On a wind plant's "Market" tab, "Settlement method" now offers "Spitz Wind (power curve)", "Spitz Wind light (reference wind speed)" and "Pauschal Wind (flat rate)". Curtailed energy and its compensation are settled turbine by turbine against each turbine's certified power curve, and the plant figure is their sum.

mirox 2.15.494 – 2.15.496
Read more in the documentationMarketWindComponents
Web appFeatureMajorReports, exports & files

Reports and exports can use metrics an organization defines itself

The reports page now has a "Metrics" tab where an organization defines its own figures from the measurements its plants record, for use in reports and exports. A metric is reported as a plant value or per component, at a chosen finest resolution, and the assistant can write and check one inside the editor.

mirox 2.15.494 – 2.15.496
Read more in the documentationMy metricsReports
Web appImprovements and fixesThe app itself

A plant's core data gains a "Yield report" tab, report charts are set per series, and the web app opens faster.

  • A plant's core data has a "Yield report" tab: monthly performance ratio and irradiation targets, with expected production calculated from them.
  • A month with no yield-report value uses a default, and a performance ratio far from that month's typical value is marked "Unusual".
  • Report charts can be set per series to bar or line, stacked, filled, with up to two unit axes, or drawn as a heatmap.
  • Each report block can carry its own period, chosen in the editor and the wizard, independent of the report's period.
  • The cell balance card of an INTILION storage now names where the weakest and strongest cell and the hottest module sit.
  • The web app opens faster: the first page loads only what it needs, and only the language in use.
mirox 2.15.494 – 2.15.496
Read more in the documentationReports
Web appFixMajorProduction & yield

Wind plants' daily energy no longer jumps by impossible amounts

Days that read tens of GWh too high or too low, after a turbine's history was read in again or after a turbine fell silent, now show what the turbines actually produced. The corrected figures appear in the day, week, month and year views and on the day power curve.

mirox 2.15.468 – 2.15.483
Web appFeatureMajorCurtailment & grid limits

A wind plant's "Turbines" page now shows curtailment losses by party

A wind plant's "Turbines" page now shows the energy lost to the grid operator, the direct marketer, environmental limits, stop commands and turbine faults. The losses are drawn as stacked areas on the day graph, as segments of the daily, weekly and monthly bars, and as a "Lost in total" figure.

mirox 2.15.468 – 2.15.483
Web appFeatureMajorAlerts & events

A plant with an alarm system now has an "Alarm system" page

A plant with an alarm system now has an "Alarm system" page, showing each contact's state, its history over 24 hours, 7 or 30 days, and the alarms raised. The intrusion panel and the communication cabinet's UPS, heating and main switch open a plant event while a contact stands and close it when it clears.

mirox 2.15.468 – 2.15.483
Read more in the documentationAlarmData loggers
Web appImprovements and fixesThe app itself

A plant's report can now be exported as full data from its library. Each report section states what the PDF prints and what the export carries.

  • A plant's report can now be exported as a CSV zip, XLSX or JSON from its library.
  • The plant's day graph on the monitor now shows production, expected output and curtailment on hover.
  • When remote access is down, the assistant now suggests checks that only read the site's router.
  • The battery "Energy flow" page now shows the full cycle count.
mirox 2.15.468 – 2.15.483
Read more in the documentationDirect VPN
Web appFeatureMajorWind turbines

Each turbine now shows its own status and the alarms it raised

A wind plant's "Turbines" page now carries a "Status" column with the maker's own wording for what each turbine reports. Opening a turbine shows a "Status & alarms" section that lists the alarms and warnings it has raised, standing and withdrawn.

mirox 2.15.457 – 2.15.467
Web appFeatureMajorWind turbines

A wind plant now has a "Components" page listing each turbine

A wind plant now has the same "Components" page a solar plant has, with rated power, review cards, tickets and open events for each turbine, plus search, sorting and paging. A datasheet carrying the power curve every analysis measures against can be assigned to several turbines or a whole data logger in one go.

mirox 2.15.457 – 2.15.467
Web appImprovements and fixesThe app itself

The monitor now counts an inverter with reduced output as down, the way it counts an outage. The battery dashboard now draws a dispatch command a plant states in watts.

  • The monitor now counts an inverter with reduced output on the down side of a plant's "State", as it already counts an outage.
  • Filtering the monitor's plant list by state now answers in a couple of seconds instead of leaving the list loading.
  • The battery dashboard now draws the marketer's dispatch command when a plant states it in watts, instead of leaving the chart and card empty.
  • The "Control signal" card and the chart tooltip no longer show the opposite sign to the power figures beside them.
  • A standalone battery plant now opens on its battery dashboard, and old links to its retired "Production" page still work.
mirox 2.15.457 – 2.15.467
Web appFixMajorCurtailment & grid limits

The dashboard's curtailment now comes from the settled figures

The dashboard's curtailment chart and cards now show the same settled figures as a plant's production page, with quarter-hours not yet settled filled in close to live. Curtailment from before June 2026 is no longer shown on the dashboard because it came from an older calculation, while figures already issued keep their value.

mirox 2.15.447 – 2.15.456
Web appImprovements and fixesThe app itself

Plants have a "Reports" page, the organization's "Resources" tab opens again, and plant lists gain a "State" column.

  • A plant's "Reports" page now assembles a report from chosen sections, with a preview and a PDF or JSON download.
  • The "Resources" tab on the organization page opens again where it lists a plant with wind turbines.
  • The monitor and dashboard plant lists now carry a "State" column — "Alert", "Warning", "Communication issue", "Disconnected", "Check" or "Inactive".
  • The "Turbines" page now shows each turbine's "Utilization (capacity factor)" and, where a datasheet is known, the maker's "Reference curve" with its "Validity band".
mirox 2.15.447 – 2.15.456
Read more in the documentationInverter events
Web appFeatureMajorBattery storage

Battery plants now open on a "Production" page

A plant set up as a standalone battery plant now opens on "Production", showing what the storage exchanges with the grid and every storage unit in the plant. Where a feed-in meter reports, the page also shows grid power and today's export and import, and without one it shows the units alone.

mirox 2.15.443 – 2.15.446
Web appFeatureWind turbines

The "Turbines" page now graphs what each turbine measures

A wind plant's "Turbines" page now graphs everything the turbines report, one turbine at a time: "Power & wind" draws power and wind speed over time, and "Curve & wind rose" draws the power curve and the wind directions. A selected day now shows its full 24 hours.

mirox 2.15.443 – 2.15.446
Web appFeatureMajorData collection

A plant's history now imports from its previous monitoring system

The "Import" tab on a plant's "Dataflow" page now takes the ZIP archive from the plant's previous monitoring system and matches its devices to components by serial number or name. The import runs day by day and can be paused, stopped, or have what it wrote deleted.

mirox 2.15.420 – 2.15.564
Web appImprovements and fixesBattery storage

A ticket can now be raised on a battery container, rack, module or cell, and measurement exports and calendars reach back to 2020.

  • A ticket can now be raised on a battery container, rack, module or cell, and those tables show its open tickets.
  • Measurement exports now reach back to 2020, and every calendar has a year dropdown for picking an older day.
  • A site router that connects over IPsec without naming the identity it expects from Mirox is authenticated again instead of being refused.
  • A wind plant now has the same step-by-step setup page as a solar plant.
mirox 2.15.420 – 2.15.422
Read more in the documentationMetrics export APIDirect VPN
Web appFeatureMajorAlerts & events

Station icons on the analysis page now count inverters

On a plant's analysis page, the icons on each station row now count inverters rather than items: one blue wrench for each inverter with open service work. An icon opens a list of those inverters with everything open on each, each entry linking to its inverter.

mirox 2.15.407 – 2.15.419
Read more in the documentationInverter events
Web appFeatureBattery storage

The round-trip efficiency tile now follows the chosen range

The round-trip efficiency tile on the battery dashboard now follows the chosen range. The tile shows its own figure for windows of seven days or more, and the day view keeps the trailing week.

mirox 2.15.407 – 2.15.576
Web appFeatureMajorData collection

The wizard now adds SMA Data Manager and Sungrow loggers

Devices behind an "SMA Data Manager / Power Manager" or "Sungrow Logger" data logger are now listed and their alarms reach the plant's event list. A blue'Log logger gains a "String monitoring" section.

mirox 2.15.397 – 2.15.406
Read more in the documentationData loggers
Web appFeatureAlerts & events

Component problems now show what confirmed them and how devices ran

A component problem's "Confirmed by" now shows which measurement or device report opened the case, with an explanation of what it means, and a finding still being watched reads "Under observation". A "Reported operating states" section shows how long the machine spent throttling itself, capped, switched off or reporting a fault.

mirox 2.15.397 – 2.15.406
Read more in the documentationEventsInverter status codes
Web appImprovements and fixesAlerts & events

A brief network glitch at a plant no longer reads as an internal problem. Battery racks, modules and cells list in position order, and the battery power graph marks AC and DC readings.

  • The plant connection view now reads "Agent restarting or reconnecting" for five minutes before it calls the problem "Internal service issue".
  • A device that went down during an outage on that path reads "Reconnecting" for three minutes after the connection returns.
  • The details panel on that view no longer closes when a date range is picked.
  • Battery racks, modules and cells now list in position order, instead of Cell 1, Cell 10, Cell 100.
  • The battery power graph now marks a reading "AC · converters" or "DC · racks", and containers and racks measure DC only.
mirox 2.15.397 – 2.15.406
Web appFixMajorBattery storage

Battery cells now show only the temperatures the device measures

Linyang battery containers previously showed six temperature readings that no sensor takes, and modules 3 and 4 showed no temperature at all. Those readings have been removed, and cell temperatures are now filed under the right module.

mirox 2.15.394 – 2.15.396
Web appFeatureMajorThe app itself

Graphs now zoom in by dragging across them

A graph now zooms into the window dragged across it, a double-click or "Reset zoom" goes back, and "Enlarge graph" opens it full screen. The production day graph now draws in five-minute steps and refines to one minute once zoomed below six hours.

mirox 2.15.394 – 2.15.396
Web appImprovements and fixesSolar equipment

The components and analysis pages can now be filtered by how many of an inverter's strings are verified.

  • Components tables now sort by model, serial number, peak power, combiner boxes and strings.
  • Sorting the components list by segment or peak power no longer blanks the counts in its Analysis column.
  • Opening the add-string dialog on the components page no longer blanks the page.
  • A past day opened from a week or month view no longer counts up as though it were today.
  • The analysis page's orientation filter is gone, and its station, inverter and combiner-box pickers now sit in their tables' column headers.
mirox 2.15.394 – 2.15.396
Read more in the documentationComponents