A battery unit idle or moving against its dispatch order for 15 minutes now raises an event on the plant's "Events" page. The event closes only when the unit or the storage as a whole follows an order again, or when its own fault stop, safety alarm or silence takes over.
On the plant's components page, in its sensor and meter tabs, each irradiation sensor and feed-in meter now shows which data logger serves it, its data state and its last data time. A logger filter narrows the table.
In the plant monitor, an event can now be acknowledged for up to 14 days or until a chosen day. A plant whose events are all acknowledged but not all on a ticket is marked with a crossed bell.
A solar plant's "Trackers" page shows its tracker field as control groups and individual trackers, with live state, a graph and batch editing. Where a plant has a plant controller, it shows under the graph on the "Trackers", battery dashboard, analysis and turbines pages.
The support page's ticket list searches the requester, the description and the conversation, with a "Best match" order.
On the connection status, alarm dashboard and networking pages, availability bar charts pan and zoom their time window with the wheel on the bar itself.
The list of possible loggers on the dataflow page shows IP addresses, as the device list on the networking page does.
A maintenance visit is recorded in the plant's event list when a technician checks in on site.
A plant grant under an organization membership or a cooperation now ends when that membership or cooperation expires. The plants, devices, or access-overview entries of the grant no longer appear for a member whose membership has expired.
Report templates and chapters, My Metrics and Data Export templates, and the alert rules, receivers, or message templates in the Alarm Manager can be marked private. A private item is visible and usable to every member, with only its creator, an admin, or a moderator able to edit or delete it.
In the plant monitor, maintenance operations are now tracked as tickets with a contact, an expected fix date, and linked events and components. A maintenance state filter appears on the plant monitor and the dashboard.
A wind plant's production forecast now appears in the fleet forecast view and on the plant's forecast strip as a five-day forecast with the wind speed at 10 m and at hub height. It settles about six hours behind real time.
A contact's certificates are uploaded through a wizard in the organization and attached to the contact. The assistant reads each document's type, validity scope and expiry during the upload.
The plant menu's "Events" page now replaces "Activity" under "Core Data". It lists every event of the plant as a table, open ones on top, with Source and Component header filters and a search box.
In a plant's event dialog, an event can now be closed, reported, or escalated by a job operator or technical operations manager. An open inverter or combiner box no-communication event can be escalated to an outage, with a notification naming who escalated it and the comment.
On the support page, a request can be closed or reopened by its customer, and a message into a closed request reopens it. An answered request with no activity for 7 days closes itself with a reminder one day before.
An event's lost energy no longer reads too low when the plant's loggers were down over the window. The estimate now uses satellite irradiation, scaled by the plant's own performance ratio over the week before.
A "Client" role below "Viewer" now appears in a plant's grant dialogs for the plant's customer, with an "Access until" expiry. It has access to live and historical operating data — production, battery, turbines, analysis, forecast and market prices — but not events, tickets, reports, exports, files, network or money figures, or plant push notifications.
The assistant now estimates the energy a plant lost over a stated window, such as an outage, and its value per month at the plant's EEG value or market value, or a marked flat rate. For plants in the German market, the estimate carries a euro figure.
The framework contract is now signed on the "Subscription" page, which replaces the "Contract" tab and the former subscription page. It shows the company that pays for each plant part, payment bundles, the subscription term, and the contract state.
A device's web interface opened through remote device access now appears under a header with the device's name, the time left on the second-factor confirmation, and controls for its stored login. The second-factor dialog appears in the page itself.
A second-factor re-check window for remote device access is now set on the organization's "Security" tab, from 10 minutes to 1 year, 30 minutes by default. "End remote access" cuts open tunnels and makes every device tab ask for the second factor again until the next confirmation.
In the "Alarm Manager," a webhook receiver now always sends with one of the organization's templates. The receiver dialog lists the organization's templates, with the ready-made examples under "Templates".
The plant's Site VPN cards now show a traffic panel per tunnel, with received and sent data on one scale and the connection state over it, following the page's time window. Up to three days shows a curve, up to ninety days a bar per day, and beyond that a bar per month.
An alert rule now carries the outage report, with the direct marketer connection's one read-only receiver in the "Alarm Manager". The alert's "Deliveries" list shows each receiver at the outage's start, renewal and end.
On the "Alarm Manager" page, an alert rule's time window can now be set from the plant's sunrise and sunset, with offsets in minutes, instead of fixed clock hours.
A passkey is now a second factor and a passwordless sign-in. The organization's "Security" tab sets how long a session lasts, how often it is re-checked, and whether a second factor is required.
A wind plant's "Unavailability" page now lists its outages and curtailments as a register per turbine, with a timeline, the reasons and the report to the direct marketer. The organization's "Direct marketers" section lists each connection, and each turbine's serial number is now editable.
Member management and cooperation changes in the organization are now handled by the moderator role alongside the admin: inviting and removing members, changing their roles, joining and removing a cooperation, and changing its shared permissions. The technical asset manager role still sees the team but no longer manages it.
A Modbus reader can now be added as a data logger with its own alarm signals. Each signal has a level, a mode, and a minimum duration before it raises an alarm, and the plant's "Alarm system" page shows its state and its history.
Historical plant data can now be imported from its data logger archives at a chosen resolution (5-minute, 15-minute, or the original), with a minimum of 3 years of coverage. While the import runs, the plant's pages show an import banner with its progress.
On the plant monitor, each turbine and battery unit now shows its health — fault, no communication, or paused — with a dialog naming why a unit is paused and since when. A unit safety alarm opens a notification linking to the unit's page, and the alarm is not silenced during a storm.
The dashboard's KPI counters no longer differ between the web app and the Mirox app or leave a stale figure after a timezone, period or filter change. Figures already issued keep their value.
In reports, exports and the assistant, revenue now shows beside "Expected revenue" — the yield report's planned feed-in at the plant's EEG tariff, aged by module degradation — and a "Financial performance ratio", actual revenue divided by expected. A running month's expected revenue stops at the current moment, in reports, exports and the assistant.
Revenue on the dashboard and the revenue page is now valued with each plant's tariffs, contracts and fees instead of a flat rate. The running month shows a price, and each figure reads "Final", "Provisional", "Estimated" or "Not calculated".
The "Production", "Turbines", analysis and battery dashboard pages now draw days, heatmaps and curtailment in the plant's own timezone, including 23-hour and 25-hour days at a daylight-saving switch. On the dashboard, a zone selector aligns every plant to the browser zone, UTC or one chosen zone.
A reading that briefly showed an energy counter at zero or a nonsense high value previously re-added the counter's total as new energy. Energy figures in graphs, reports, exports and the battery dashboard now cancel that reading against the next one, so the affected figures fall to what the plant actually produced.
The "Reports" page now offers a "Technical Report" template with the plant's master data, panel and inverter inventories, a performance ratio analysis by day and month, a metrics chapter, high-priority events and a glossary. The template's title page can be composed in the editor and matches the PDF and document exports.