Skip to content

August 2026

Changes released in August 2026.

Open in the full timeline

Web appFixMajorCurtailment & grid limits

Curtailment figures at battery plants no longer read too high

At plants with battery storage, curtailed energy and the compensation shown against it now come from what the inverters produced, and fall where they read too high. The feed-in meter sits behind the battery, so quarter-hours spent charging looked like no production at all and were claimed in full.

mirox 2.15.376 – 2.15.393
Web appFeatureNetwork & remote access

An organization's VPN can now be moved to another host

An organization's VPN row now has a "Move to another host" action. Before the move is confirmed, it shows where the VPN would land, how many plants restart on site and lose data briefly, which plants get a new VPN address, and which routers keep the old one and stay disconnected until restarted.

mirox 2.15.376 – 2.15.393
Read more in the documentationDirect VPN
Web appImprovements and fixesAlerts & events

A component's status now shows what was detected and since when. Alarm codes from inverters now read in the user's own language.

  • A component's status on the analysis or components page now opens what was detected, since when, and how often each code was raised.
  • A feed-in meter now shows "Energy partly estimated" and an inverter with a frozen lifetime counter "Counter frozen", each opening the event behind it.
  • When strings are added, "Select all" now covers every inverter of the plant and no longer stops at the first 100.
  • A Huawei battery container no longer shows a warning for low coolant, nor a status number that appears in no Huawei document.
  • Creating a remote-access server for both IPv4 and IPv6 on a plant that already has remote access works again.
  • A file dragged into an assistant conversation is attached, and an image in a ticket opens full size when clicked.
mirox 2.15.376 – 2.15.393
Read more in the documentationEventsInverter status codesDirect VPN
Web appFixMajorCurtailment & grid limits

A limit matching the grid connection no longer counts as curtailment

Curtailed energy and the compensation shown against it now fall at plants whose grid connection is smaller than their inverters. A limit from the direct marketer that merely restates full output was counted as curtailment all day long and is now judged against the smallest of panel peak, inverter rating and grid connection.

mirox 2.15.367 – 2.15.375
Web appFeatureMajorAlerts & events

Inverters now show when switched off, tripped or reporting a fault

Inverters now show what they report about themselves: "Stopped by command" when one was switched off, "Protective stop" when its protection tripped, and "Device fault" when the machine reports a fault the measurements cannot show. The maker's own wording and how often it was raised are shown alongside.

mirox 2.15.367 – 2.15.375
Read more in the documentationInverter status codesEvents
Web appImprovements and fixesThe app itself

A hybrid plant's power graph now shows its battery. Lists across the app can be filtered from their column headers.

  • A hybrid plant's day power graph now draws its battery's power.
  • Power curves no longer double an inverter's output after its data logger has been renamed.
  • The dashboard can now be filtered from its column headers.
  • Searching or excluding a portfolio on the dashboard now narrows its KPI cards.
  • A plant's production page now opens with a summary of every component type.
  • Identifiers in tables can now be copied by clicking them.
mirox 2.15.367 – 2.15.375
Web appFeatureAlerts & events

Inverter status codes now open events for stops and self-derating

The status code an inverter reports about itself now opens an event when the device was stopped by command, tripped on its protection, raised a safety alarm or is throttling itself back. The health column shows "Stopped by command" and "Protective stop", and every code one inverter reports is held in a single event.

mirox 2.15.361 – 2.15.366
Read more in the documentationInverter status codes
Web appImprovements and fixesThe app itself

Whether a device is online is now answered the same on every page, instead of differently on each.

  • A stopped on-site agent no longer shows green for fifteen minutes, a short restart gap shows amber, and a device never seen shows grey.
  • Battery converters and containers now show the state they report about themselves, for NR Electric converters and Linyang containers.
  • The AC/DC switch beside a converter's graph now works, and a separate DC entry in the list of values is no longer needed.
  • The visibility and shared note of several ticked combiner boxes can now be changed in one go, per inverter, data logger or whole plant.
  • The assistant can now hide the components on one data logger, showing what would change and applying it only after confirmation.
mirox 2.15.340 – 2.15.352
Read more in the documentationComponentsAI assistant
Web appFixMajorRevenue & market

Marktprämie figures per band are corrected and show their energy

The revenue tables now show an "Energy (§ 51 applied)" column: the energy each band's Marktprämie is actually paid on. Each band's premium is now worked out from that energy instead of being shared across the bands by capacity.

mirox 2.15.330 – 2.15.339
Web appFeatureMajorSolar equipment

A replaced inverter can now be confirmed and keeps its history

A swapped inverter, listed twice because the data logger gave the new unit a new address, is now spotted as a pair and offered for confirmation on the components page. Once confirmed, the new inverter takes over the old one's configuration, the old unit is retired, and the graphs keep the earlier history.

mirox 2.15.330 – 2.15.339
Read more in the documentationComponents
Web appFeatureNetwork & remote access

A plant's VPN tab now shows when remote access is not running

Each remote-access connection on a plant's VPN tab now shows whether it is really working, rechecked while the tab is open. One that is set up but not running is marked red, with the next step to take, and one that is running while the remote site has not connected is marked amber.

mirox 2.15.330 – 2.15.339
Read more in the documentationDirect VPN
Web appImprovements and fixesNetwork & remote access

Remote-access connections a plant dials out to now show as much as the ones it accepts.

  • A remote-access connection the plant dials out to now shows its remote site under the name it was given, with a throughput chart.
  • When a VPN is added, an IPsec configuration file can now be uploaded and its values filled in.
  • A plant's OpenVPN remote access offered over IPv6 now accepts connections from IPv6 clients.
  • Connected clients on a plant's VPN tab are now named after their protocol, instead of a guess at the device at the far end.
  • Long lines in a VPN log now scroll sideways inside the window instead of running off the edge.
mirox 2.15.330 – 2.15.339
Read more in the documentationDirect VPN
Web appBreaking changeMajorRevenue & market

PPA contracts can no longer be settled on Mischpreis

Mischpreis can no longer be chosen under a contract's "Revenue model". A contract still set to it is valued at "Marktwert (as-if-produced)", and compensation for curtailment ordered by the marketer follows that model from this release, while figures already issued keep their value.

Action required: Plant and portfolio managers: open the market configuration of every plant whose direct-marketing contract was settled on the Mischpreis model, and confirm that "Marktwert (as-if-produced)" or "Fixed value" is the right revenue model for that contract. Marketer-curtailment compensation is calculated on the chosen model from this release; support helps you with an affected contract.

mirox 2.15.310 – 2.15.329
Web appFixMajorRevenue & market

The revenue comparison now comes from the monthly settlement

The comparison of settlement methods on the revenue page now uses the figures from the monthly settlement. A month that has not been settled yet reads as unavailable instead of showing a number.

mirox 2.15.310 – 2.15.329
Web appFixMajorCurtailment & grid limits

Flat-rate compensation is now measured against the last valid period

For plants settled on the flat-rate method, a curtailment is now measured against the power in the last valid period before it, rather than the highest power found earlier. Curtailed energy and compensation fall wherever the old rule lifted them, while figures already issued keep their value until a month is rebuilt.

mirox 2.15.310 – 2.15.329
Web appImprovements and fixesThe app itself

Inverters now show the operating status they report about themselves. Lists, pickers and live graphs that misbehaved work again.

  • The analysis and components pages now have a "Status code" column showing what a Huawei, SMA or Fronius inverter reports about itself.
  • A site connected over IPsec again shows its address under "Live status" instead of a dash.
  • The inverter picker in a plant's segment dialog no longer opens empty when the dialog is opened a second time.
  • Members whose plant access comes through a shared portfolio can pick those plants in the site switcher again.
  • Paging through a long list no longer shows one row twice and leaves another one out.
  • A live graph on a plant's networking page follows the clock again, instead of standing still while it keeps loading.
mirox 2.15.310 – 2.15.329
Read more in the documentationInverter status codesDirect VPN
Web appFixMajorCurtailment & grid limits

Curtailment rows no longer show a figure from another calculation

Where the data a plant's settlement method needs has not been published yet, lost energy and compensation worked out a different way were shown as the plant's own. The row and its dialog now read "Satellite data not yet available" instead, or "No usable measurement data" where the gap is permanent.

mirox 2.15.296 – 2.15.309
Web appFixMajorRevenue & market

Curtailment excluded by § 51 no longer shows a euro amount

A quarter-hour excluded from remuneration by § 51 EEG no longer shows a euro amount. The amount disappears when the month is recalculated, while the excluded energy stays in kWh.

mirox 2.15.296 – 2.15.309
Web appFeatureMajorAlerts & events

Inverters that need a service visit are now flagged while producing

An inverter at full output but showing wear is now flagged with "Elevated temperature", "Insulation weakening", "Phase imbalance" or "Efficiency declining". Each problem is marked on the component and listed separately.

mirox 2.15.296 – 2.15.309
Read more in the documentationEvents
Web appImprovements and fixesThe app itself

Analysis graphs now show voltage and current for inverters, combiner boxes and strings. Dashboard bars now leave out a day whose energy counter jumped to an impossible value and mark it with a warning.

  • The analysis switch is now "Show connected components", breaking a component into its parts when on.
  • The analysis now adds a component to the comparison when a row checkbox is ticked in compare mode.
  • A VPN connection Mirox hosts now has an "IP version" setting: IPv4, IPv6 or both.
  • A WireGuard connection Mirox hosts now has a "Reconnect port" on which the site router re-dials.
mirox 2.15.296 – 2.15.309
Read more in the documentationDirect VPN
Web appFeatureMajorNetwork & remote access

IPsec remote access now shows whether the site is connected

Remote access over IPsec (IKEv2), for site routers that speak nothing else, now shows whether the remote site is connected, with its availability and traffic, instead of an unknown state. A site set up but never connected stays in the list, and "Add peer" attaches a second router.

mirox 2.15.291 – 2.15.295
Read more in the documentationDirect VPN
Web appFeatureMajorAssistant

The assistant now says where something is and what it means

The assistant now answers where a setting or page is with a link to it, and explains what a type of event means or how a measurement is worked out. It also lists what a plant measures, draws the curve for a component or a whole plant, and points out stretches with no data.

mirox 2.15.291 – 2.15.295
Read more in the documentationAI assistant
Web appImprovements and fixesNetwork & remote access

Remote access to a plant now survives a move of its on-site agent. For connections Mirox hosts, OpenVPN is now suggested instead of WireGuard.

  • Remote access to a plant survives a move of its on-site agent: the address stays the same and the agent reconnects by itself.
  • For plants whose remote access Mirox hosts, OpenVPN is now suggested instead of WireGuard, and each option explains the reason.
  • A half-finished VPN wizard is now kept as a draft and restored when it reopens for the same plant.
  • A site connection can now be given its own name when it is added or edited, instead of the suggested one.
mirox 2.15.279 – 2.15.290
Read more in the documentationDirect VPN
Web appFixMajorCurtailment & grid limits

Curtailment figures no longer count night-time quarter-hours

Curtailment running into the night no longer counts energy from the irradiation sensor's night-time reading, a quarter-hour below 5 W/m² now counting as zero. Curtailed energy and the compensation shown against it fall at plants settled from measured irradiation, for instructions reaching into the evening or early morning.

mirox 2.15.274 – 2.15.278
Web appFeatureMajorCurtailment & grid limits

The "Production" page now lists each settled curtailment

A "Curtailments" section on a plant's "Production" page now lists every settled curtailment and every live detection in the period shown, each with its window, its Ausfallarbeit, how it was settled and the compensation. The graphs now draw the same figures, so the last days of a period stay empty until the settlement has run.

mirox 2.15.274 – 2.15.278
Web appFeatureMajorNetwork & remote access

Remote access can now be set up over IPsec (IKEv2)

The "Add a VPN connection" wizard now offers "IPsec (IKEv2)" beside WireGuard and OpenVPN, for industrial routers that speak nothing else. Mirox can host the tunnel for the plant or connect to a router that hosts it, with a pre-shared key that is generated or pasted.

mirox 2.15.274 – 2.15.278
Read more in the documentationDirect VPN
Web appImprovements and fixesUsers & access

A portfolio shared by a partner organization opens its plants' connection status, tickets, events and graphs again. A "Security Officer" share is now passed on only as that role.

  • A portfolio shared by a partner organization now opens its plants' connection status, tickets, events and graphs.
  • A "Security Officer" share is now passed on only as that role, never with fewer rights.
  • A "Security Officer" can open a VPN connection's "Live status" and logs, while "Debug" stays closed.
  • A plant's "Production" page now shows its panel peak, inverter peak, DC/AC ratio and grid limit under the title.
  • The web pages of a plant's devices open again for a "Security Officer".
mirox 2.15.274 – 2.15.278
Read more in the documentationPermission systemDirect VPN
Web appFixMajorRevenue & market

Curtailment compensation is no longer shown before 23 December 2025

Compensation for curtailed energy is now shown only for quarter-hours from 23 December 2025 on, the day that rule took effect. A compensation figure for a delivery month lying wholly before that date disappears the next time that month is settled.

mirox 2.15.261 – 2.15.273
Web appFeatureMajorUsers & access

A role can now be limited to some of a plant's networks

Every network of a plant can now be tagged by what it carries — "Plant control", "Network infrastructure", "Cameras" or "Security systems" — when it is added, edited or opened for remote access. The new "Security Officer" role reaches only the networking, camera and security networks, never production, revenue or plant control.

mirox 2.15.261 – 2.15.273
Read more in the documentationNetwork segmentationPermission system
Web appFeatureMajorCurtailment & grid limits

A plant's regulating signals now appear on a "Control Units" tab

A new "Control Units" tab on a plant's components page now lists the signals the plant is regulated by: the cap from the grid operator, the cap from the direct marketer, and the setpoint the plant controller applies. Each signal names the data logger reporting it and can be renamed, hidden or given a note.

mirox 2.15.261 – 2.15.273
Read more in the documentationComponents
Web appImprovements and fixesThe app itself

A plant's day graph no longer turns red for hours after a brief drop in its remote connection.

  • Components now flag two more problems: producing far below what is expected of them, and sending no measurements at all.
  • A plant's network devices can now be searched by what is opened on them, and filtered by device type across the whole list.
  • Buttons on a plant's networking and core-data pages now match what the role may actually do.
  • The API now accepts a lowercase id, a spaced id list and an out-of-range page or limit instead of refusing them.
mirox 2.15.261 – 2.15.273
Read more in the documentationNetwork devicesDirect VPN
Web appBreaking changeMajorNetwork & remote access

The "VPN auto-heal" wizard is replaced by "Start AI diagnosis"

The "VPN auto-heal" wizard can no longer be started, while a run started earlier still opens. A plant's VPN connection is now diagnosed from "Inspect VPN connection" on the plant, where "Start AI diagnosis" takes the router on site and what is needed and lets the assistant read the configuration and the logs itself.

Action required: Anyone who used the "VPN auto-heal" wizard: start the diagnosis from the plant instead. Open the plant's networking page, choose "Inspect VPN connection" on the VPN, go to its diagnosis step, name the router on site and what you need, and carry on with the assistant in the tab it opens. Starting a new auto-heal run is refused from this release; runs you started before it stay readable.

mirox 2.15.253 – 2.15.260
Web appFixMajorCurtailment & grid limits

Curtailed energy and compensation before mid-May 2026 rise

Curtailed energy and the compensation shown against it rise for periods before mid-May 2026: quarter-hours that carried no measurement now count, worked out from the plant's own irradiation sensors and feed-in meters. Plants settled on the flat-rate method get figures there for the first time.

mirox 2.15.253 – 2.15.260
Web appFeatureBattery storage

A datasheet can now be assigned to many battery components at once

The components page now has a tab for each battery level — "PCS", "Box", "Storage", "Module" and "Cell" — with a checkbox on every row. "Edit Components" then sets or clears the datasheet for the ticked rows, for everything below the filtered parent, or for every component of that type.

mirox 2.15.253 – 2.15.260
Web appImprovements and fixesBattery storage

Files of up to 200 MB can now be put into a plant's storage. Each battery container shows its racks, modules and cells, and each of those can be followed with its own curves.

  • Files of up to 200 MB can now be uploaded into a plant's storage.
  • A file over 50 MB is stored but not analysed automatically and reads "Too large to analyse (over 50 MB)".
  • Each battery container now shows how many racks, modules and cells sit below it, and how many of its cells are healthy.
  • A converter, rack, module or cell on a battery plant can now be picked and its own curves followed as a graph, heatmap or table.
  • A plant's contact list sorts and filters again when it holds entries with no personal name, such as the grid operator.
  • A battery component can no longer be marked as verified or given a note, as its details come from the battery system itself.
mirox 2.15.253 – 2.15.260
Read more in the documentationFile storage
Web appFixMajorCurtailment & grid limits

Excluded curtailments now stay out of the settlement

A curtailment episode excluded with "Exclude from settlement" is now left out of the month's curtailed energy and compensation. Until this release the exclusion was recorded, but the month was settled as though nothing had been excluded.

mirox 2.15.243 – 2.15.252
Web appFeatureMajorAssistant

An organization's own AI provider can now be connected

An organization's own Anthropic, OpenAI or self-hosted account can now be added by an administrator or moderator under "AI providers" in the organization's AI settings. The models members may use are picked from it and one marked as the default, after which members choose a model per conversation.

mirox 2.15.243 – 2.15.252
Read more in the documentationAI assistantMCPAI
Web appFeatureMajorBattery storage

Battery plants now have an "Energy flow" page from converter to cell

Battery plants now have an "Energy flow" page. It shows live power through the converters and racks, state of charge, the voltage and temperature spread of the cells, a heatmap of every cell in a rack, and the same curves over a chosen period.

mirox 2.15.243 – 2.15.252
Web appImprovements and fixesData collection

Adding a Phoenix Contact or Huawei data logger works again, instead of being refused the moment it is saved. A device's web page opened through remote access no longer loops endlessly or arrives as a file download.

  • Adding a Phoenix Contact or Huawei data logger no longer fails the moment it is saved.
  • A device's web page opened through remote access no longer loops endlessly or arrives as a file download.
  • The assistant now says when web search or document reading is unavailable, instead of answering from memory.
  • The name "MCP Server Authentication" is reserved for the assistant's own token and is refused when an access token is created.
  • The "Battery storage present" switch in a plant's master data now shows in the user's language.
mirox 2.15.243 – 2.15.252
Read more in the documentationData loggersProxy
Web appFixMajorCurtailment & grid limits

Curtailment figures no longer count a limit near full power

A limit from the grid operator or the direct marketer left between 85 % and full power no longer counts as a curtailment, even where it does curtail. Curtailed energy and the compensation shown against it drop at plants whose limit sat in that band, at some for a whole month.

mirox 2.15.235 – 2.15.242
Web appFeatureSolar equipment

String names can now be grouped by MPPT

With "Group string names by MPPT" switched on under a solar plant's "Component Naming" settings, its strings read "MPPT 2 – String 1" in the components list, a string's details, the analysis tables and tickets. Strings whose inverter does not report how many inputs each MPPT has keep their plain numbering.

mirox 2.15.235 – 2.15.242
Web appFeatureMajorRevenue & market

The assistant now answers what a plant earned against plan

The assistant now answers what a plant earned in a month or a year: production revenue, the compensation for grid and marketer curtailment, and the market value behind them. Several plants are compared side by side and against the yield the plan expected, and months not yet settled are named as provisional.

mirox 2.15.228 – 2.15.234
Web appImprovements and fixesAssistant

The assistant keeps writing its answer while another page of the app is open.

  • An answer the assistant is writing keeps going when the chat is left, a tab switched or the connection lost, and is waiting on return.
  • The chat reopens on the last conversation when opened again within 15 minutes, instead of an empty one.
  • The assistant can be asked whether strings are built as configured and names any whose measured orientation, tilt or panel count differs.
  • The assistant can be asked what a plant is producing right now, or what it is expected to produce over the next five days.
  • Asked why a plant is unreachable, the assistant tells whether the plant's own router or its internet line stopped answering.
  • The assistant no longer hands out a colleague's phone number or email, while contacts stored for a plant are still answered.
mirox 2.15.228 – 2.15.234
Web appFeatureMajorAssistant

The assistant now always answers on the model Mirox provides

A model can no longer be chosen for the assistant, which always answers on the model Mirox provides. A model an organization had chosen earlier is cleared the next time the AI settings open.

mirox 2.15.225 – 2.15.227
Web appFeatureAssistant

The assistant's reasoning depth can now be chosen

A dropdown beside the chat's input bar sets how much reasoning the assistant does before it answers: "Deep", "Medium", "Low" or "Off". Every conversation opened or switched to starts on "Medium".

mirox 2.15.225 – 2.15.227
Web appImprovements and fixesAlerts & events

The assistant can now say what an event cost in lost energy.

  • Asked about an event, the assistant estimates the lost energy and names the components and tickets linked to it.
  • The activity list now opens on events of high priority and above, and can still be filtered to any priority level.
  • Notification rules can no longer be set to the two lowest priority levels, and a rule already set to one keeps it.
mirox 2.15.225 – 2.15.227
Web appFixMajorProduction & yield

A feed-in meter's own reading is used again on bright days

A feed-in meter's own reading is used again on bright days, and the day counts as "measured" instead of "integrated". Before, a high reading was thrown out as impossible and replaced by the total added up from the inverters, or by zero where there was no substitute.

mirox 2.15.214 – 2.15.224
Web appFeatureAlerts & events

The connection list now shows why an inverter has gone silent

Each inverter in the monitor's connection list now leads with the reason it cannot be reached: an open outage on the network device its data logger sits behind, naming that logger. Such an inverter counts as a connection issue at once, instead of only after an hour without a signal.

mirox 2.15.214 – 2.15.224
Read more in the documentationNetwork devices
Web appImprovements and fixesAlerts & events

Open events and connection outages are now counted without double counting, and every event carries a name in the user's language.

  • A plant's open-event count no longer adds the grouping alert on top of the dead components themselves: twelve dead inverters read as twelve.
  • Every event in a plant's activity list, dialogs and tickets now shows its name in the user's language instead of an untranslated one.
  • The month chart no longer marks a day as a connection outage when the plant produced right through a brief drop, or before monitoring began.
  • A Solar-Log logger can now be stopped, under its settings, from reporting a feed-in meter another source already reads, which counted grid power twice.
  • In the API, the site list can be narrowed by portfolio and type, both comma-separated, with the total and the paging following the filter.
mirox 2.15.214 – 2.15.224
Read more in the documentationData loggers
Web appFeatureMajorCurtailment & grid limits

The monitor list now shows live power and the limits per plant

The monitor list now has a "Live" column showing the power each plant is feeding into the grid, refreshed every 10 seconds. Below it stand the plant's two power limits, from the grid operator and from the direct marketer, each coloured only while it is holding the plant back.

mirox 2.15.198 – 2.15.213
Web appFeatureMajorCurtailment & grid limits

A detected curtailment can now be excluded from the settlement

Curtailment episodes detected at a plant now appear in the plant's events as their own entries, with the limit that applied and the period covered. "Exclude from settlement" on an entry leaves it out of that month's curtailment figures, and "Re-include in settlement" puts it back.

mirox 2.15.198 – 2.15.213
Web appImprovements and fixesAlerts & events

The monitor list no longer counts an inverter idle at night as missing.

  • "Reachable subnets" now shows where two plants' networks overlap, not only where they are identical, and lets the plant serving the shared addresses be chosen.
  • On a per-Wp day graph, the reference curve now follows the selected components, so an east-west plant shows both of its peaks.
  • The sign-in page now states how long the pause after repeated failed sign-ins lasts, and that changing the password does not end it early.
  • Third-party components received security updates.
mirox 2.15.198 – 2.15.213
Read more in the documentationAccount lockoutVPN
Web appFixMajorRevenue & market

Compensation no longer counts a curtailed quarter-hour twice

Where two sources sent readings for the same minutes — after a restart, for example — a plant's curtailed energy for that quarter-hour was counted twice, and the compensation shown read too high. Such a quarter-hour is now left out of the settlement, and figures already issued keep their value.

mirox 2.15.190 – 2.15.197
Web appImprovements and fixesAlerts & events

A data logger that has gone silent no longer counts as healthy in a plant's tally.

  • Graph tooltips now mark each curve with the events running at that moment, and a click pins the tooltip so those events can be opened.
  • Where a plant already has a Mirox-hosted remote access server, another router or network can now be added to it instead of a second server.
  • A plant's coordinates can now be entered as degrees, minutes and seconds or as decimal minutes, chosen under "Coordinate format".
  • Each connected site in a plant's remote-access list now opens its own "Live status", and its tunnel address can be copied with one click.
  • The edit dialog of a network device no longer shows the values of the device edited before it.
  • A plant can now be given a build date in the future when it is created.
mirox 2.15.190 – 2.15.197
Read more in the documentationDirect VPN
Web appFeatureData collection

A data logger's settings can now be edited after it is added

The "Edit logger" dialog now has a "Configuration" tab. There, the options a data logger offers and the "Serial / metric id prefix" its components are identified by can be changed without deleting and re-adding the logger, and "Apply changes" sends them to the plant.

mirox 2.15.185 – 2.15.189
Read more in the documentationData loggers
Web appImprovements and fixesAlerts & events

Open events now appear on the components list, on the components they concern.

  • The components list marks each inverter, combiner box and string with its open events, and selecting a mark opens that event.
  • A combiner box shows how many of its strings send no measurement data, and lists them when the number is selected.
  • A plant's string and inverter lists open again instead of failing with an error.
  • Opening a device's own web page through remote access no longer returns to the Mirox sign-in page.
  • A partner organization given a technical role can now edit a plant's network devices and add or remove devices.
  • IP addresses now sort by number in device lists and access logs, so .2 comes before .101.
mirox 2.15.185 – 2.15.189
Web appFixMajorProduction & yield

Expected yield now allows for panel ageing since the plant was built

A plant's expected monthly yield now allows for panel ageing counted from the day the plant was built, not from the day Mirox started collecting its data. Expected figures fall where the plant is older than its data, and no ageing is applied where no build date is recorded.

mirox 2.15.176 – 2.15.184
Web appImprovements and fixesData collection

Each value read from a data logger can now be given its own factor and limits.

  • Under "Advanced settings", a factor and a high and low limit can be set for each value read from a data logger.
  • Inverters, combiner boxes and strings that have never sent a measurement are now counted separately, no longer as producing.
  • An inverter, combiner box, irradiation sensor or feed-in meter added by hand can now be deleted from its table, after a confirmation.
mirox 2.15.176 – 2.15.184
Read more in the documentationData loggers
Web appFixMajorProduction & yield

Component details no longer show energy a thousand times too high

An inverter, a string or a combiner box opened from the analysis page showed its produced, expected and lost energy a thousand times too high — kWh labelled as MWh — and the battery overview showed DC power the same way. Both read correctly again.

mirox 2.15.166 – 2.15.172
Web appImprovements and fixesNetwork & remote access

The personal VPN now follows the technical role held on each plant. Plants with no AC limit configured now get a 5-day forecast.

  • Every plant on which a technical role is held now appears under "Reachable subnets" in the profile, including one shared by a partner.
  • An "Asset Manager (Commercial)" no longer reaches plant equipment: no subnets on their VPN, and no changes to a device's "Web Targets".
  • A meter's own reading now counts for today and for a plant's first days, instead of looking like a data logger fault.
  • Plants with no AC limit configured now get a 5-day forecast and expected values — uncapped estimates, flagged as such under "Expectation comparison".
  • Editing a network device from its details no longer leaves the page unclickable until it is reloaded.
  • The creator or assignee of a ticket now receives its notifications even while the plant is muted, unless the ticket itself is muted.
mirox 2.15.166 – 2.15.172
Read more in the documentationVPNProxyNotifications
Web appFeatureMajorProduction & yield

A plant without a feed-in meter can now get a virtual one

A solar plant without a feed-in meter can now be given a virtual one with "Add Virtual Meter" on the plant's "Feed-in Meters" tab. The on-site agent then reports the plant's grid power and total grid energy as the sum of its inverters, as estimates rather than measured readings.

mirox 2.15.160 – 2.15.165
Web appImprovements and fixesUsers & access

Renaming an organization no longer fails when no contact email is stored for it.

  • A field cleared in an organization or contact dialog now saves as empty, and an unchanged dialog saves nothing.
  • Through the API, /v1/sites now lists the reachable plants without health figures, and /v1/sites/status returns health for the plants named in the call.
  • A remote-access route whose subnet contains the reserved address 10.112.0.1 is now flagged, and only that single address stays unreachable inside the plant.
mirox 2.15.160 – 2.15.165
Web appFeatureMajorAlerts & events

The monitor page now shows each plant's open events

A "Status" column on the monitor page shows a green checkmark when all is well, otherwise how many problems are open and how serious they are. Selecting it opens "Active events": everything still going on at that plant, grouped by type, each row linking to the part it concerns.

mirox 2.15.152 – 2.15.159
Web appFeatureUsers & access

The "Sites" tab now lists plants and portfolios shared by partners

The "Sites" tab now lists, under "Shared with your organization", the plants and portfolios other organizations share, below the organization's own. Each row names who shared it, the role given, the portfolio a plant comes through, and reads "visible only — no data access" when it cannot be opened.

mirox 2.15.152 – 2.15.159
Read more in the documentationCoop restrictions
Web appBreaking changeMajorReports, exports & files

Raw data exports stop above 36,000 values in a single column

A raw data export is refused if one column would hold more than 36,000 values — a full year at 15-minute resolution still fits — or if splitting by plant would give more than 50 columns, one per metric and plant. A shorter period, a coarser step, or merged plants keep an export within both limits.

Action required: API users: keep every raw data export within 36,000 values per column — a full year at 15-minute resolution — and, where you split by plant, within 50 columns (metrics × plants). Anything above either limit now fails instead of running. Shorten the time range, choose a coarser step, or merge the plants instead of splitting them.

mirox 2.15.144 – 2.15.151
Read more in the documentationMetrics export API
Web appImprovements and fixesProduction & yield

The monitor chart now shows what a plant should have produced while it was offline. The week, month and year charts gain the same expected-production curve as the day chart.

  • The monitor chart now shows what a plant should have produced while it sent nothing, marked "Expected (no connection)".
  • Reference curves now break where the plant sent nothing, instead of drawing a straight line across the gap.
  • On the export page, "Try it out" now provides ready-made terminal commands, a Python script and an AI prompt, with a reporting-only access token.
  • A plant's components can now be searched and attached to a ticket while it is still being written.
  • Large exports covering many plants now arrive faster.
  • Every date range picker now offers "Last year", meaning the whole of the previous calendar year.
mirox 2.15.144 – 2.15.151
Read more in the documentationMetrics export APIRaw data excel exportAPI tokens
Web appFeatureNetwork & remote access

The assistant explains and diagnoses a plant's remote access

The assistant now answers a question about a plant's remote access with every connection: its role, protocol, the sites it connects, the networks it routes, and each one's last known status. Where something looks wrong, it names a likely cause.

mirox 2.15.134 – 2.15.143
Read more in the documentationDirect VPNVPN service
Web appImprovements and fixesThe app itself

Hovering a person in tickets and support shows their profile, activity links open the right plant again, and a plant's remote access asks before restarting.

  • In tickets and support, hovering a person shows their profile: organization, role, email, phone and their job in the plant.
  • Links in the activity list open the right plant again and lead straight to where the event can be acted on.
  • A reaction to a message now appears in the support and ticket lists as the newest activity, with who reacted and to which message.
  • In a plant's remote-access settings the networks are listed in the order they are routed, and a network can be renamed in place.
  • Restarting a plant's remote access now asks for confirmation and states how many connected sites the restart affects.
  • Third-party components received security updates.
mirox 2.15.134 – 2.15.143
Read more in the documentationDirect VPN
Web appFeatureMajorNetwork & remote access

Remote access now shows live status, diagnosis and network tools

Three tabs beside the logs — "Live status", "Diagnose" and "Debug" — show whether a plant's remote access is working. "Live status" shows each connection's address, throughput and how long ago it last checked in, updated once a second.

mirox 2.15.130 – 2.15.133